Protimeter ferrule nuts, 2 pack
The retaining nuts that hold the pins on top of a Protimeter pin-type meter.
Specifications
| Part number | BLD0501 |
|---|---|
| Pack size | 2 |
| Function | Retaining nut for the pins on the top of the meter |
Compatible meters
- Protimeter MMS3
- Protimeter MMS2
- Protimeter SurveyMaster
- Protimeter Mini, Mini C and Digital Mini
- Protimeter TimberMaster
When the nut is the fault, not the pin
If a new pin needle still works loose, or will not sit square, the ferrule is worn. A pin that moves makes intermittent contact, and intermittent contact reads low — the meter tells you the material is drier than it is. It is a cheap part to replace and an expensive one to ignore.
Related parts
Meters this fits
- Protimeter MMS3 — and the MMS2 it replaced
- Protimeter SurveyMaster
- Protimeter TimberMaster
- Protimeter Digital Mini
- Protimeter Mini C and Protimeter Mini
It does not fit the HygroMaster range, which measures air rather than materials, or the non-invasive Aquant and ReachMaster Pro, which take no probes at all.
Tell us which Protimeter you run and we will confirm the right part before you order.
