The HydraMaster RX20 NXG with Classic Style Head (Australian Version) is a tool that every cleaner and restorer should own.

It revolutionized the way that carpets are cleaned and with the new enhancements, cleaning and ownership are better than ever and remain the standard of performance in rotary extraction.

Now you can have the new NEXTGEN with the original Classic Head Design from the RX20HE.

The RX20 set the standard for Rotary Jet Extraction® cleaning, with over 25,000 units sold over the last 35 years. HydraMaster introduced rotary extraction cleaning with three primary goals: a higher level of cleaning performance in a carpet cleaning wand, faster drying; and reducing fatigue for the cleaning technician.

Now HydraMaster is raising the stakes in rotary extractors with the introduction of the RX20 NEXTGEN, a new tool that redefines that standard and “ups the ante.” Now you can get the new NEXTGEN with the Classic Edition Head design. If you prefer the original head, then this is the model for you!

Take the best of the old and the new enhancements to the world’s best rotary extractor were made by carefully listening to the input of cleaning and restoration contractors worldwide:

Your customer can see extracted water and soil through the site tube in the onboard crevice tool.
The handle has been ergonomically enhanced and re-designed for operator comfort.
On-board detailed operation instructions make it easier to train new technicians.
An additional switch sustains head rotation and allows for operation with the left hand only.
New no-slip handle locking mechanism.
Streamlined manufacturing processes without compromising performance, reliability & durability.

How does the RX20 NEXTGEN Clean Faster and Better?

It cleans the carpet fibre from 5 different angles.

With 3 spray jets matched with 5 vacuum slots that are independently suspended by a flexible spring arm, the RX20 NEXTGEN makes over 650 cleaning passes per minute. This super agitation, combined with the unit’s weight cleans a carpet deeper, extracting soil and cleaning solution.

The rotating head cleans all sides of the carpet fibre, fluffing up and restoring the pile. The self-propelled RX20 NEXTGEN glides over the carpet; the rotary action of the cleaning head does all the work.

The RX20 NEXTGEN sweeps back-and-forth with just a slight change of balance on the handle. The effort needed to use an RX20 NEXTGEN is a fraction of that used scrubbing back and forth with a wand. Best of all, the extraction recovery performance of the RX20 NEXTGEN dries the carpet faster than ever.

The results from using the HydraMaster RX20 NEXTGEN are astounding, especially on extremely soiled, matted carpets.

PLEASE NOTE: THE AUSTRALIAN VERSION COMES WITH A SHROUD (NOT PICTURED)TO COMPLY WITH LOCAL STANDARDS.

User Manual

Model supplied

Carpet Cleaners Warehouse supplies the RX20 NEXTGEN as model 700-041-036 — the CE version, 230 V, 50 Hz, built for Australian supply.

HydraMaster also builds this machine as 700-041-030, -031, -032 and -035 for North America, and as -330, -331, -332, -333, -334 and -407 for other markets. Those are 115 V or 60 Hz configurations and are not suitable for Australian use. The owner's manual, MAN-47328 Rev. B (March 2019), covers all eleven.

Buying spare parts for an RX-20

The RX-20 has been in production since the 1980s across many revisions, and not every part carries across generations. If you are ordering spares for an existing machine rather than this one, check the model number on the data plate first and send it to us — most parts fit the whole range, but a few do not.

Documents

Owner’s Manual — MAN-47328 Rev. B, March 2019 (PDF, 15 MB)

This manual covers models 700-041-030, -031, -032, -035, -036, -330, -331, -332, -333, -334 and -407. If your machine is older, contact us with the model number from the data plate and we will send the edition that matches it.