Hardwood Preservation Finish (Gloss) is designed to be used as a preservation finish over an existing urethane finish over a hardwood floor.

It is a low-solid blend of urethane and acrylic so that it can be easily applied over a urethane finish after a thorough cleaning and a properly prepared base finish. The base finish can be prepared by the extraction or abrasive cleaning method.
This preservation finish serves as the wear coat and protects the original finish of the floor. Apply the finish immediately after the extraction cleaning system is finished.
A second coat of finish is optional for the extraction cleaning system.
Apply the finish about an hour after the abrasion cleaning system is completed. The abrasion cleaning system leaves the hardwood floor damp making it necessary for a dry time of about an hour. A second coat of finish is necessary for the abrasion cleaning system.

To apply, use terry cloth covers and a finish applicator. Once a floor has dried naturally for approximately 45 minutes, a second coat of finish is then applied and also allowed to dry naturally. The end result is a clean, refinished, and rejuvenated wood floor and a happy customer.

Dilution Ratios: RTU RTU pH: 7.8 Contains: 3.78ltrs

(CW032GL)

Information Sheets
Safety Data Sheets

Specifications

SKU	CW032GL
Brand	Bridgepoint
Shipping Weight	4.1000kg
Shipping Width	0.150m
Shipping Height	0.320m
Shipping Length	0.200m
Shipping Cubic	0.009600m3
Unit Of Measure	1Gal