Death to odours....

How does Odor Death remove odour?

This amazing product removes obnoxious odours such as those caused by pet urine, skunk spray, vomit, mould & mildew, feces, and organic & protein decay.
It is very effective on odours associated with a death, such as cadaverine (dead mouse).
It works to remove odours caused by urine, smoke, putrefaction, doggie odour, etc.

It can be added to most cleaning pre-sprays to create a dual-purpose application.
It will not leave a sticky dirt-attracting residue. It dries completely non-sticky.

Odour Death is designed for use as a stand-alone product, but if preferred, it can be added to most detergents/pre spray.

Dilution Rates: Light to Medium Odour 250ml/4Ltr | Heavy Odour 250-500ml/4Ltr

Remove any visible odour source and pre-vacuum the carpet.
Locate contaminated areas using a black light or moisture detector.
Treat the areas with a pump-up or injection sprayer until saturated. An in-line pressure sprayer (10:1 tip) may be used without diluting the product. Agitate with a pile brush or rake.
For subsurface applications on carpet, a water-claw-like tool can be used to extract from the carpet backing and padding underneath.
Depending on the saturation of substrate and degree of odor, apply to carpeting at approx 10-30 square meters per 4 Ltrs of Ready-To-Use product and give 15-20 minutes dwell time.
Clean and extract with your method of choice, such as hot water extraction or a low moisture system, such as pads or bonnets
Remember, to remove odour, the solution MUST come in contact with the odour source, so in severe situations, complete saturation of the carpet, including the padding, may be necessary
This product WILL NOT leave a dirt-attracting residue
Pre-test all items to be cleaned for colour fastness before applying.
It may be used on all surfaces that are both colour-fast and water-safe.
Use to kill odours on upholstery, mattresses, hard surfaces, pet bedding, litter boxes, etc.
For hard surfaces, spray or wipe Odor Death and let it set for several seconds; remove with a clean, damp cloth or towel.

Information Sheets
Technical Bulletin
MSDS
Product Label