Top case for the Wagner L612/L622 hand-held moisture meter. This is the upper housing half of the meter: it carries the display window and keypad area and seals the electronics against dust and moisture.
Fitment
- Wagner L612 hand-held moisture meter
- Wagner L622 hand-held moisture meter
Important: Two Top Case Listings
CCW lists two top cases: this one (WECST-61200-001, listed for the L612 and L622) and the L622 top case (WECST-62200-001). Wagner part numbers are specific to the meter series. Tell us your meter model and serial number and we will confirm which case fits before you order.
Case, Not Calibration
Replacing a cracked top case restores the seal around the electronics and the display. It does not affect calibration, but a meter that has been dropped hard enough to crack its case is worth checking against a known standard, such as the Wagner Calibration Verification Block, before it is trusted again.
Specifications
| Part | Top case (upper housing) |
|---|---|
| Suits | Wagner L612 and L622 hand-held moisture meters |
| CCW SKU | WECST-61200-001 |
Frequently Asked Questions
Is the L622 still current?
Wagner has replaced the L622 with the L5300. Parts remain relevant to existing L612 and L622 meters in service.
Does fitting a new case need recalibration?
A case does not change calibration, but verify the meter after any hard drop.
Not sure which case you need? Send us your meter model and serial number before ordering.
