Creates a thick, rich lather to lift dirt and debris from coils.
The CoilJet foaming nozzle is designed to add air to the spray of foaming coil cleaner, increasing foam levels and helping lift and remove dirt from HVAC and refrigeration coils. SpeedClean lists it as part CJ-9619.
Key features
- Creates a thick, rich lather for better cleaning.
- Best if used with a foam coil cleaner.
- Increases cleaning effectiveness by lifting out dirt embedded in coils.
- Quick connect fittings.
Description
Creates a thick, penetrating lather with the CoilJet Foaming Nozzle attachment. Innovative quick connect design easily snaps onto CoilJet and agitates water and chemical to create a thick lather to coat and clean even the dirtiest coils.
Why foam helps on a coil
Foam clings. A foaming cleaner applied as foam stays on the face of the coil and works into the fin pack while it dwells, instead of running straight off. SpeedClean's CoilJet method is to apply the solution evenly, let a foaming cleaner sit for about 5 minutes if possible, then rinse with clean water.
Applications
- HVAC condenser and evaporator coils.
- Refrigeration units.
Specifications
| Part | Foaming nozzle assembly |
|---|---|
| SpeedClean part | CJ-9619 |
| Connection | CoilJet quick connect |
| CCW SKU | GWTCJ-9619 |
Using it
- Prime the CoilJet with no nozzle fitted, then set the chemical valve to the cleaner's dilution.
- Relieve the pressure, snap the foaming nozzle on and apply foam evenly across the coil.
- Let it dwell (about 5 minutes), keeping the foam wet.
- Close the chemical valve, change to the yellow 15 degree nozzle and rinse thoroughly with clean water.
Important — pressure and chemistry
SpeedClean describes the output as safe for any coil. The CoilJet runs at 125 psi; fins can still be bent by spraying at close range or across the fins, so keep your distance and stay in line with the fin direction. Use only coil cleaners that are compatible with the CoilJet: SpeedClean says no acids and no cleaners containing sodium or potassium hydroxide.
Testimonial
“The foaming action this nozzle creates helps lift dirt right out of the coil.” – Tim R., CT (testimonial published by SpeedClean, USA)
Frequently asked questions
Does it work with non-foaming cleaners?
It will spray them, but the benefit comes from a cleaner formulated to foam. SpeedClean recommends it with foam coil cleaners.
Do I rinse through the foaming nozzle?
Change to a standard nozzle for the rinse. It gives a cleaner, more controlled rinse through the fins.
Will it fit other brands of sprayer?
It is designed for the CoilJet quick connect. Fit on other equipment is not confirmed.
Related products
- CoilJet yellow 15 degree nozzle
- CoilJet spray gun with quick connect
- SpeedClean CoilJet CJ-125 coil cleaner
Tell us your CoilJet model or serial number and we will confirm the part before you order — SpeedClean has revised several components and the older and newer versions are not always interchangeable.
