Not Stain Removal Mystified - BUT - Stain Removal Simplified.
Six Stain Removers and one Post Treatment solution take care of 99% of stains. This kit contains everything in one professional kit to remove: permanent inks, organic dyes, synthetic dyes, cosmetics, paint, protein spills, food, rust, gum, adhesives, and MORE! Spot Stop stops wicking, drives residues under the fibre, prevents re-soiling, and removes the odour.
Kit contains:
- Stain Zone (quart)
- Red Zone Ready (quart)
- T-Rust (pint)
- Gel Break (pint)
- Avenge Pro (12 oz.)
- All Solv Extreme (12 oz.)
- Spot Stop (quart)
- Oversized insulated carry case
- Gum Getter
- Cotton towels (3)
- Disposable gloves (3 pairs)
- Spot & Stain Removal Guide
- Training DVD
NOTE: The video below is for educational purposes only and does not define the contents of the Bridgepoint Spotting Kit. For a COMPLETE LIST of contents please refer to the list above.
Choosing a spotter by stain type
Spotting failures are almost always a chemistry mismatch, not a technique problem. The pH of the spotter has to suit what you are removing.
| Stain | Chemistry | Product |
| Protein — blood, milk, vomit, egg, food | Alkaline, pH 10.5 | Protein Spotter |
| Rust | Acidic, pH 4.5, no neutralising needed | T-Rust |
| Coffee and tea | Acidic, pH 4–4.5, applied hot | Coffee Stain Remover |
| Red food dye, cordial, sports drink | Neutral, pH 7–7.5 | Red Zone Ready |
| Mixed or unknown organic and synthetic dyes | Oxidising system | Stain Zone |
| Chewing gum, tar, oily spots | Citrus solvent gel | Gel Break |
| General purpose, wide range | Solvent-based | Avenge Stain Remover |
Finish with a residue rinse. Professional-strength spotters leave residue that attracts soil and can wick back. Spot Stop neutralises alkaline residue and lays down an encapsulating polymer, which is what stops the mark reappearing a week later.
Frequently asked questions
Why did the spot come back?
Two usual causes. Either contamination remains below the surface and has wicked back up as the carpet dried, or spotter residue has been left in the pile and is attracting soil. A residue rinse with Spot Stop addresses the second; the first needs proper extraction of the affected area.
Can I use an alkaline spotter on any stain?
No. Alkaline spotters suit protein. On rust or coffee they achieve nothing and can set the stain. Match the chemistry to the stain — see the table above.
Do I need to neutralise after spotting?
After alkaline spotters, yes. T-Rust is the exception — Bridgepoint state it requires no neutralising and rinses with clear water. In general, leaving a professional-strength spotter in the pile without rinsing creates a resoiling problem where you solved a stain problem.
Will these damage wool or natural fibre?
Check the label before use. Several of the oxidising products are specified for synthetic carpet and fabrics only and are not recommended for natural fibres. Test in an inconspicuous area on anything you have not treated before.
Is the documentation Australian?
The safety data sheets for the seven chemicals in the kit are Australian editions issued by Aberford Holdings (the importer, trading as Carpet Cleaners Warehouse), prepared from the manufacturer's US editions. The cleaning guide is the manufacturer's North American edition, provided for technical reference.
Safety
The kit has no single safety data sheet: each of the seven chemicals has its own Australian safety data sheet issued by Aberford Holdings (importer, trading as Carpet Cleaners Warehouse), linked under Documents below. Several are classified Danger: T-Rust is corrosive and toxic in contact with skin, All Solv Extreme and Gel Break are flammable liquids, and Stain Zone is an oxidising peroxide solution that causes serious eye damage. The packed kit is dangerous goods. Transport: UN 3316, Chemical kit, Class 9, Packing Group II. Read the sheet for each product before first use. For poisons advice, call 13 11 26.
Documents
- Safety Data Sheet – Stain Zone (Australian edition, Aberford Holdings, version 1.0, 29 October 2026) (PDF)
- Safety Data Sheet – Red Zone Ready (Australian edition, Aberford Holdings, version 1.0, 29 October 2026) (PDF)
- Safety Data Sheet – T-Rust (Australian edition, Aberford Holdings, version 1.0, 29 October 2026) (PDF)
- Safety Data Sheet – Gel Break (Australian edition, Aberford Holdings, version 1.0, 29 October 2026) (PDF)
- Safety Data Sheet – Avenge Pro (Australian edition, Aberford Holdings, version 1.0, 29 October 2026) (PDF)
- Safety Data Sheet – All Solv Extreme (Australian edition, Aberford Holdings, version 1.0, 29 October 2026) (PDF)
- Safety Data Sheet – Spot Stop (Australian edition, Aberford Holdings, version 1.0, 29 October 2026) (PDF)
- Manufacturer's kit cover sheet – Spot and Stain Removal Kit CS03D (Bridgepoint Systems / Aramsco, United States edition, February 2023) (PDF)
- Stain Removal & Cleaning Guide (PDF)
The Australian sheet is prepared by Aberford Holdings from the manufacturer's US edition and reflects Aberford's own classification under the Australian WHS Regulations and the ADG Code. It is reviewed at least every five years, or sooner if the manufacturer revises the source sheet. Labels, specification sheets and cleaning guides are the manufacturer's North American editions and are provided for technical reference.
