Red Zone Ready is a one step, highly effective, food and beverage red stain remover process that is designed to alter the structure of stains by removing, bleaching, or making them invisible.
It is ideal for use with any stain caused by spilled children’s fruit drinks or sports drinks. This product is safe and effective on virtually any stain caused by a common household food or beverage spill. In addition, special additives allow the accelerating action to be activated right on the stain rather than in a spray bottle as with conventional two-part Red Stain Removers.
This product is for use with synthetic carpets or fabrics only. Not recommended for natural fabrics.
Dilution Ratios: RTU RTU pH: 7-7.5 Contains: 1 quart
Choosing a spotter by stain type
Spotting failures are almost always a chemistry mismatch, not a technique problem. The pH of the spotter has to suit what you are removing.
| Stain | Chemistry | Product |
| Protein — blood, milk, vomit, egg, food | Alkaline, pH 10.5 | Protein Spotter |
| Rust | Acidic, pH 4.5, no neutralising needed | T-Rust |
| Coffee and tea | Acidic, pH 4–4.5, applied hot | Coffee Stain Remover |
| Red food dye, cordial, sports drink | Neutral, pH 7–7.5 | Red Zone Ready |
| Mixed or unknown organic and synthetic dyes | Oxidising system | Stain Zone |
| Chewing gum, tar, oily spots | Citrus solvent gel | Gel Break |
| General purpose, wide range | Solvent-based | Avenge Stain Remover |
Finish with a residue rinse. Professional-strength spotters leave residue that attracts soil and can wick back. Stop Spot neutralises alkaline residue and lays down an encapsulating polymer, which is what stops the mark reappearing a week later.
Frequently asked questions
Why did the spot come back?
Two usual causes. Either contamination remains below the surface and has wicked back up as the carpet dried, or spotter residue has been left in the pile and is attracting soil. A residue rinse with Stop Spot addresses the second; the first needs proper extraction of the affected area.
Can I use an alkaline spotter on any stain?
No. Alkaline spotters suit protein. On rust or coffee they achieve nothing and can set the stain. Match the chemistry to the stain — see the table above.
Do I need to neutralise after spotting?
After alkaline spotters, yes. T-Rust is the exception — Bridgepoint state it requires no neutralising and rinses with clear water. In general, leaving a professional-strength spotter in the pile without rinsing creates a resoiling problem where you solved a stain problem.
Will these damage wool or natural fibre?
Check the label before use. Several of the oxidising products are specified for synthetic carpet and fabrics only and are not recommended for natural fibres. Test in an inconspicuous area on anything you have not treated before.
Is the documentation Australian?
The safety data sheet, label and specification sheet are Bridgepoint’s North American editions, provided for technical reference. Australian classification, transport and disposal requirements take precedence. Ask us if you need the Australian position on a specific product.
Documents
- Safety Data Sheet (PDF)
- Product Label (PDF)
- Specification Sheet (PDF)
- Stain Removal & Cleaning Guide (PDF)
Bridgepoint documentation is published in the United States. Labels, specification sheets and cleaning guides are the North American editions and are provided for technical reference. Australian classification, transport and disposal requirements take precedence.
