The Injectidry HP-PLUS Wall and Ceiling Package is a complete system for drying inside wall and ceiling cavities without removing the linings. The HP-PLUS unit moves air through Active hoselines and small wall injectors, so the cavity is dried in place behind plasterboard, under cabinets and behind kickboards.
It replaces Injectidry's HP60i wall and ceiling package. Injectidry describes it as quieter (under 60 dB), more powerful and simpler to set up than the HP60i.
Key Features
- Dries up to about 37 m (122 linear feet) of wall and ceiling, according to Injectidry
- Self-adjusts to maximum airflow from about 1.8 m to 36.6 m (6 ft to 120 ft) of Active hoseline, with no pressure relief valve to set
- Runs under negative pressure (drawing air out of the cavity) or positive pressure (pushing air in)
- Works with the original HP60 attachments and hoses
- Add Vac-It panels to dry floors with the same unit
What Is in the Package
- 1 x HP-PLUS unit (OE-HPPBO-EA)
- 1 x power cord (MP-MC143-EA)
- 1 x main air IN hose with main wand
- 1 x main air OUT hose
- 1 x silencer (OE-IDS60SIL-EA)
- 12 x Active hoses (MP-IDAH3-EA)
- 32 x quick connect 1.5 in hose cuffs (MP-HC3-EA)
- 14 x quick connect 1.25 in hose connectors (MP-IDQCC01-EA)
- 1 x carry bag (OE-IDCB-EA)
- 1 x rolling duffle bag (OE-DB-EA)
- 1 x 1.5 in x 25 ft safety yellow blank hose (MP-IDPL03-EA)
- 2 x 3/8 in x 200 ft safety yellow tubing (OE-RH05A-EA)
- 2 x inline manifolds (MP-QCM01-EA)
- 150 x black wall injectors (OE-IM06A-EA)
- 50 x soft red nipple caps (OE-RP2-EA)
- 50 x tubing connectors (MP-RH07A-EA)
- 4 x end cap plugs (MP-IDQCEP01-EA)
- 2 x small Y connectors (MP-QCY-EA)
Negative or Positive Pressure?
Negative pressure draws moist air out of the cavity and is the usual choice where the cavity may be contaminated, because it does not push that air into the room. Positive pressure pushes drier air through the cavity. Choose by the water category and what is in the wall, and fit an Interceptor inline HEPA filter when drawing from a cavity that may hold mould.
Specifications
| Brand | Injectidry |
|---|---|
| CCW SKU | IDHP-PLUS-240V-01 |
| Supply | 240 V |
| Current draw | Under 12 A in any hose configuration, according to Injectidry |
| Noise | Under 60 dB, according to Injectidry |
| Listings | ETL and cUL listed, according to Injectidry |
| Mode | Negative or positive pressure |
Frequently Asked Questions
Will it trip a breaker?
Injectidry rates the draw at under 12 A however much hoseline is connected. Tripping is then down to a faulty breaker or too much other equipment on the same circuit.
Can I use my old HP60 hoses?
Yes. The HP-PLUS works with the original HP60 attachments and hoses.
Can it dry floors too?
Yes, with Vac-It panels added. See the floor drying pack and Vac-It panels below.
How far will it reach?
Injectidry quotes up to about 37 m (122 ft) of wall and ceiling from the one unit.
Why is it priced on request?
We quote drying systems at the time of order so the package matches the job you are equipping for.
Related Products
- Injectidry HP-PLUS floor drying pack
- Injectidry Active hoseline 6 ft with wall injectors
- Injectidry HP wall injectors
- Injectidry Vac-It variety panel pack
- Injectidry Interceptor inline HEPA filtering system
This product is priced on request. Call us on 1800 68 68 69 or use the quote button on this page, and tell us the machine or job it is for so we can confirm the right part or package.
