Injectidry HP‑PLUS Floor Drying Package

• Draws less than 12 amps—no matter the setup
• CUL and ETL listed
• Can be used with the original HP60 attachment and hoses
• Easier setup; no pressure relief valve to worry about

The HP-PLUS Floor Drying Package is the improved version of Injectidry's HP60i Floor Drying package. This unit is quieter (less than 60 dB), more powerful, and easier to set up than the original. You can use up to 12 Multi-Port or 20 8-Port Vac-It panels with an increase of up to 30% in drying capabilities. 

There are no breaker tripping problems (unless the breaker is faulty or you have too much equipment on the circuit). The unit's amperage will never exceed 12 amps.

The HP-PLUS also gives you consistent pressure with no need for pressure relief valves. It will automatically adjust to maximum airflow whether you're using 1 or 20 Vac-It panels.

The HP-PLUS Floor Drying Package comes complete with the following:

• 1 - HP-PLUS Unit (OE-HPPBO-EA)
• 1 - Power Cord (MP-MC143-EA)
• 1 - Main Air IN hose with 2" cuff
• 1 - Main Air OUT hose
• 1 - Silencer (OE-IDS60SIL-EA)
• 1 - Water separator (OE-IDS60WS-EA)
• 1 - 3/8" x 200' Safety Yellow Tubing (OE-RH05A-EA)
• 1 - 10" x 30" Clear Panel (OE-SPLPCLR-EA)
• 5 - Slim Panels - small ports (OE-IVISLIM9-EA)
• 3 - Multi-Port Panels (OE-IVIPSP5-EA)
• 6 - 7" x 30" extra-slim, small point vac-it panels (OE-XSP10-EA)
• 1 - Large 8-Point Panel (OE-IVIPP-EA)
• 50 - ID soft (red) nipple caps (OE-RP2-EA)
• 4 - Quick Connect Panel T's (OE-VACT-EA)
• 1 - Carry Bag (OE-ICB-EA)
• 10 - Endcap Plugs (OE-IDQCEP01-CS)
• 1 - 1.5" x 50' Safety Yellow Blank Hose (MP-IDPL03-EA)
• 1 - Rolling Duffle Bag (OE-DB-EA)
• 30 - Quick Connect 1.5" Hosecuffs (MP-HC3-EA)
• 9 - Quick Connect Inline Manifolds (MP-QCM01-EA)
• 2 - Small Y' (MP-QCY-EA)
• 4 - 1.25" Hose connectors (MP-IDQCC01-EA)
• 1 - Truck mount extraction connector
• 1 - Main W (to be used with HB300)