PMF V2P-EZ Brass Trigger Valve, 500 psi

PMF V2P-EZ brass trigger valve, 500 psi

The V2P-EZ is PMF's forged brass trigger valve for high-temperature solution. It has a stainless steel stem and a PTFE seat, and is rated by PMF to 500 psi. It is the current version of PMF's "P" valve, fitted to many PMF upholstery and hand tools.

Specifications

Where it fits in the PMF valve range

• V120P — 120 psi, low temperature, plastic body
• V300 — 300 psi, forged brass
• V2P-EZ — 500 psi, high temperature, PTFE seat. This listing.
• V800-EZ — 800 psi, high temperature

PMF also makes a 200 psi, low-temperature brass V2PB with an EPDM seat. It looks similar but is a different valve with a different repair kit. Check the stamping before you order parts.

Service parts

• Repair kit: V2P-EZ repair kit (new style)
• Handle: PMF valve handle for V2P and V800 valves

Frequently asked questions

What if I need more than 500 psi?

The V800-EZ is rated to 800 psi. PMF also makes a stainless V2PS-EZ at 1,000 psi and a V1250 at 1,250 psi. We do not list those, so ask us.

Is it interchangeable with a Kingston valve?

PMF states Kingston and V2P interchangeability for the stainless V2PS-EZ, not for this brass V2P-EZ. Tell us what you are replacing and we will confirm rather than guess.

My valve drips after I release the trigger. Do I need a new valve?

Usually not. A drip is normally a worn seat or O-ring, and the forged body outlasts the seals. Fit the V2P-EZ repair kit first.

Can I use it on a portable extractor?

Yes, provided the machine stays within 500 psi. The rating is a maximum, not a requirement.

What we see in the field

Release the trigger; the water should stop. If it doesn't, don't just accept a little dribble as normal. Depressurise the line, then check for dirt or damage at the seat. Work out whether it's a seal job or a damaged body before ordering.

Not sure which valve you have, or which kit fits it? Send us a photo of the valve and we will identify it before you order.