Bottom half of the handle for the Wagner L722 lumber stack probe. The handle is made in two halves; this is the bottom half. The top half is a separate part.
Fitment
Why a Cracked Handle Matters on a Measuring Instrument
The handle holds the electronics in alignment and keeps kiln humidity out of them. A cracked housing lets moisture into the instrument that is measuring moisture, and that is a failure you may not detect until the readings have already been trusted.
Related Parts
- L722 handle top (WE712-71201-001)
- L722 replacement hinge (WE712-72206-001)
- L722 spare parts kit, twin pack (hinges and springs)
- L722 extension cable (WE830-71202-001)
Specifications
| Part | Handle, bottom half |
|---|---|
| Suits | Wagner L722 lumber stack probe |
| CCW SKU | WE712-71202-001 |
Frequently Asked Questions
Do I need both halves?
Only if both are damaged. Inspect both halves and the hinge after a drop before ordering.
Does replacing the handle affect calibration?
The handle is housing, not sensor. After any impact, check the probe and meter against the Calibration Verification Block.
Wagner part numbers are specific to the meter series. Tell us your model and we will confirm before you order.
