TurboForce replacement vacuum hose for the 12 inch TH-40 spinner
TurboForce Part # TH-140, replacement vacuum hose on TH-40 Turbo Hybrid 12" tile cleaning spinner.
Fitment
- TurboForce TH-40 Turbo Hybrid, 12 inch
Check it before you blame the machine
The vacuum hose on a spinner is flexed continuously and dragged across abrasive surfaces. It fails by developing splits along its length or at the cuffs — and a split hose leaks air rather than water, so there is nothing to see.
The symptom is a tool that will not dry the floor. Before condemning a vacuum motor, run the tool with the hose off and feel for lift, then check the hose along its whole length with the machine running.
Specifications
| TurboForce part | TH-140 |
|---|---|
| Type | Steel coil vacuum hose |
| Length | 24 in (about 610 mm), per the TH-40 owner's manual parts list |
| Fits | TH-40 Turbo Hybrid, 12 inch |
This is the short vacuum hose on the tool itself, not the vacuum hose that runs back to the machine.
Frequently Asked Questions
Is the vacuum hose covered by warranty?
No. Turbo Force's TH-40 warranty excludes vacuum hoses and pressure lines — they are wear parts.
Does it fit the 15 inch TH-15?
This part is listed for the TH-40. Contact us with your TH-15 details before ordering.
TurboForce parts are model-specific — the TH-40, TH-15 and the Mini share very little. Tell us your tool model and we will confirm the part before you order.
