The Injectidry SA-5-2 Specialty Adapter 5-Port connects a centrifugal air mover to five lengths of 4 inch ducting and five 2 ft wall vents, so the air mover's output is pushed into wall cavities and under flooring instead of across the room.
- Dry up to 16 linear feet (as packaged)
- Works with a centrifugal air mover to dry walls
- 5 x 4 inch ports direct air to finished wood flooring and gymnasium flooring systems
Sold in a package of 1 Adaptor (ea) with 5 x 2ft Wall Vents.
Package Includes
- 1 x SA-5 Housing
- 5 x WV2 2' Wall Vent
- 10 x DC-TK4 4" Turnkey Clamps
- 10 x 2" Drywall Screws
- 5 x M4 4" x 25' sections of Mylar Ducting
- 1 x CB1 General Purpose Carry Bag
The air mover is not included.
What It Is For
Injectidry describes the SA-5 as a way to dry multi-layered and insulated walls with any centrifugal air mover. Injectidry's catalogue lists these uses:
- Multi-layered and insulated wall assemblies
- Finished timber flooring
- Sleepered gymnasium floors
- Ceilings, through downlight (can light) openings
It is a drying accessory. It moves air into cavities — it is not a containment or air-filtration device.
Important: SA-5-2 or SA-5-4?
Both packages use the same five-port adapter. The difference is vent length and how much wall they cover.
| Package | Wall vents | Covers (as packaged) |
|---|---|---|
| SA-5-2 (this package) | 5 x 2 ft (WV2) | Up to 16 linear ft (about 4.9 m) |
| SA-5-4 | 5 x 4 ft (WV4) | Up to 31 linear ft (about 9.4 m) |
Figures are Injectidry's. If most of your losses are long runs of wall, the SA-5-4 covers nearly twice the length from the same air mover.
SA-5 or Adaptidry?
Injectidry makes the SA-5 for centrifugal air movers. The Adaptidry 5 Port and Adaptidry 9 Port seat on the duct rings of air movers and ventilators instead. Choose by the air mover you already run. If you are not sure which suits your fleet, tell us the make and model.
Operating Advice
- Keep ducting runs as short and straight as the job allows. Every kink and extra metre costs airflow.
- Secure every duct at both ends with the turnkey clamps. A duct that pops off blows air into the room, not the wall.
- Injectidry rates its M4 Mylar ducting to 160°F (about 71°C). Do not feed it heated air above that.
- Monitor the materials with a moisture meter, not the clock. The adapter speeds drying — it does not tell you when the wall is dry.
- Follow Injectidry's instructions supplied with the package for vent placement and fixing.
Specifications
| Brand | Injectidry |
|---|---|
| Injectidry part | SA-5-2 |
| Ports | 5 x 4 inch |
| Coverage | Up to 16 linear ft (about 4.9 m), as packaged |
| Wall vents | 5 x WV2, 2 ft (about 610 mm) |
| Ducting | 5 x M4, 4 in x 25 ft (about 100 mm x 7.6 m) Mylar, rated to 160°F (Injectidry) |
| Air mover | Centrifugal — not included |
| Carry bag | CB1 General Purpose |
| CCW SKU | IDSA-5-2 |
Frequently Asked Questions
Which air movers does it fit?
Injectidry says any centrifugal air mover, but does not publish a model list or the adapter's mounting dimensions. Tell us which air mover you run and we will confirm before you order.
Can it pull air out of the wall as well as push it in?
Injectidry's literature for the SA-5 describes pushing air into the structure. It does not describe negative (extraction) use, so we do not claim it.
Can I add more vents?
Injectidry sells 1, 2 and 4 ft vents, tees and extra carry bags separately. CCW does not list them individually — ask us.
How do I dry a timber or gym floor with it?
Injectidry lists finished timber and sleepered gym floors as uses, but the method depends on the floor construction. Talk to us before you drill or open a finished floor.
Is the adapter available on its own?
Injectidry makes an adapter-only version (SA-5-AO). CCW does not list it — ask us if you need one.
Related Products
- Injectidry Specialty Adapter 5-Port x 4 ft Wall Vents
- Injectidry Adaptidry 5 Port
- Injectidry Adaptidry 9 Port
- Injectidry Panel and Wall Vent Carry Bag (Large)
- Structural Drying
Not sure the SA-5 suits your air movers? Send us the make and model and we will confirm the setup before you order.
