Protimeter replacement pin needles, 1 inch, 20 pack
The replacement needles for the integral pins on top of a Protimeter pin-type moisture meter.
Specifications
| Part number | BLD0500 |
|---|---|
| Length | 1 inch (25 mm) |
| Pack size | 20 |
| Application | Replacement pin needles that fit the top of the meter |
Compatible meters
- Protimeter MMS2
- Protimeter SurveyMaster
- Protimeter Mini, Mini C and Digital Mini
- Protimeter TimberMaster
Pins are the cheapest part of an accurate reading
A bent or blunt pin makes intermittent contact, and on a resistance meter poor contact reads low — it reports a substrate as drier than it is. That is the dangerous direction for the error to run. Change pins at the first sign of damage rather than at the point of obvious failure.
The needles are held by the BLD0501 ferrule nuts. If a new needle still works loose, replace the ferrule nut as well — a needle that moves under hand pressure will not read consistently.
Tell us which Protimeter you run and we will confirm the right part before you order.
