Overview
The Automatic Wastewater Disposal System (AWDS) is an automatic pump-out (APO) kit that discharges recovered wastewater from the truckmount into a building's sanitary sewer, instead of holding it in the waste tank until the end of the job.
HydraMaster part number 000-079-220, listed as Kit, AWDS Universal. It is supplied as a complete kit with a 12 V diaphragm pump, base, plumbing fittings and integrated wiring.
What problem it solves
A truckmount without automatic pump-out is limited by its waste tank. On a large commercial job that means stopping to dump, or running a separate discharge line by hand. The AWDS moves the wastewater continuously while you keep cleaning, so tank capacity stops being the thing that sets your working pattern.
Specifications
| Pump | 12 V diaphragm pump (HydraMaster 000-111-195) |
| Flow rate | 8 US gallons per minute (approximately 30 L/min) |
| Motor | 1/6 HP gear motor, low amp draw |
| Valves | Oversized, to pass larger solids and debris |
| Level control | Float switch in the recovery tank (HydraMaster 000-157-090), normally open |
| Circuit protection | 30 A pump-out circuit breaker (supplied) and 30 A inline main fuse in the supply |
| Base | Powder coated steel |
| Wiring | Integrated; wires into an existing auxiliary switch |
| Floor space required | 1.5 sq ft (approximately 0.14 m²) |
| HydraMaster P/N | 000-079-220 (assembly Rev E) |
Flow rate, motor rating and floor space are HydraMaster's published figures. Metric conversions are ours.
What is in the kit
Electrical components and wire, from the AWDS Universal Kit Assembly 000-079-220 Rev E:
- AWDS pump-out pump and motor, 8 GPM, 12 V (000-111-195)
- Float switch for the recovery tank (000-157-090)
- 30 A pump-out circuit breaker (000-018-007)
- 12 gauge wire, 20 ft each of red (000-178-015) and black (000-178-063)
- 18 gauge wire, 6 ft each of brown (000-178-068) and white (000-178-069)
- Powder coated base and plumbing fittings
Verified fitment
- HydraMaster Boxxer 318HP — AWDS Universal Kit Assembly, Figure 9-33
- HydraMaster TITAN 575HP — AWDS Universal Kit Assembly, Figure 9-45
- HydraMaster TMTG4000 — listed in the machine parts book as a fitted component
The kit is designed to wire into any auxiliary switch, so it is not restricted to the machines above. Verified from the HydraMaster parts books: Boxxer 318HP MAN-46586 Rev C and TMTG4000 MAN-47717 Rev B.
Discharge requirements in Australia
Discharging cleaning wastewater to the sewer is regulated by the local water authority, and trade waste requirements differ between states and between councils. Some sites require a trade waste agreement or pre-treatment before discharge is permitted.
The AWDS gives you the means to discharge to a sanitary sewer. Whether you may do so at a given site is a question for the water authority and the building owner, not for the equipment. Confirm before you rely on it as your disposal method.
Installation
Installation is not included in the price.
The plumbing allows a floor installation in most locations using the supplied fittings, and the pump requires 1.5 sq ft of clear floor space. The wiring is integrated, so no additional circuit is needed.
The pump-out switch, pump-out control relay and motor relay are specific to each machine model. Wire colours, terminal assignments and relay contacts must be checked against the machine's own wiring drawings before installation.
Installation should be carried out by CCW or an authorised representative. Fitting a kit that ties into the machine's electrical and waste plumbing has warranty implications if it is done incorrectly — talk to us before you start.
Related parts
- 3/4 Swing Check CVP Valve (169-009) — fitted in the AWDS discharge line
- Nipple 3/4 inch NPT 3/4 Garden (052-281) — adapts the discharge to garden hose thread
- HydraMaster Relay Switch (157-022) — used in the kit wiring
Documents
- AWDS 000-079-220 electrical technical reference (PDF) — CCW reference drawn from the HydraMaster owner's manual MAN-47860 Rev A. It is a functional redraw, not a verified pinout: check wiring against the actual machine.
Other automatic pump-outs CCW supplies
- Automatic Waste Pump-Out Kit – 12 V Impeller Pump (Sapphire Scientific 68-158S) — pump mounted beside the waste tank with a float switch in the tank; needs a Group 24 battery
- External Automatic Pump-Out – 12 V Diaphragm Pump (Truckmount Option) — pump mounted outside the tank; supplied only with a new truckmount
Frequently asked questions
What type of pump is it?
A 12 V diaphragm pump driven by a 1/6 HP gear motor, rated by HydraMaster at 8 US GPM.
Will it fit a machine that is not a HydraMaster?
The kit is built to wire into an auxiliary switch rather than a specific machine, so it is not tied to one brand. Send us your machine details and we will confirm before you order.
Does it handle solids?
The valves are oversized to pass larger solids and debris than a standard pump-out. It is not a substitute for a filter — keep the recovery tank filter serviced.
Do I need a separate circuit for it?
No. It is designed to run from an existing auxiliary switch.
How much floor space does it need?
1.5 sq ft of clear floor, approximately 0.14 m².
Can I discharge to any sink or gully?
Not automatically. Check the trade waste requirements for the site and the local water authority first.
Video
Not sure whether the AWDS suits your machine and the work you do? Send us your machine model and serial number and we will talk it through before you order.
