Overview
Nipple, 3/4 inch NPT to 3/4 inch male garden hose, listed by HydraMaster as Nipple, 3/4" NPT X 3/4" Male Garden Hose.
It adapts the automatic pump-out line to a standard garden hose thread so waste can be discharged through ordinary hose.
Where it is fitted
- Dura-Flow APO pump assembly — 1
- Chemical jug tray assembly — 1
- 85 gallon rotomoulded tank installation — 1
- Used with swing check valve 000-169-009, garden hose gasket 000-057-055 and cap 000-027-014
Verified fitment — current machines
- Boxxer 318HP — AWDS Universal Kit Assembly (Figure 9-33), 1
- TITAN 575HP — AWDS Universal Kit Assembly (Figure 9-45), 1
- TMTG4000 — Dump / Vacuum Bracket Assembly (Figure 9-32), 1
Important — on the Boxxer 318HP and TITAN 575HP this is part of the AWDS kit, not the base machine. If your machine has no automatic wastewater disposal system fitted, this nipple will not be present. On the TMTG4000 it sits in the dump and vacuum bracket assembly instead.
Verified from the HydraMaster parts books: Boxxer 318HP MAN-46586 Rev C and TMTG4000 MAN-47717 Rev B.
Related parts
- 3/4 Swing Check CVP Valve (169-009) — fitted in the same line
- Automatic Wastewater Disposal System (AWDS) Kit (079-220)
Frequently asked questions
Why a garden hose thread?
So waste can be discharged through ordinary garden hose rather than a proprietary fitting — practical on site, and easy to replace anywhere.
Do I need the check valve as well?
They are fitted in the same line. If the pump-out will not prime after sitting, the check valve is the more likely fault of the two.
Is it brass?
HydraMaster lists the material as brass in the assembly parts list.
Not sure whether your machine has AWDS fitted? Send us the model and serial number and we will check.
Identifying the right part
HydraMaster truckmounts share many components across models and across production years. Part numbers in the CCW catalogue are the HydraMaster part number with the 000- prefix removed — this item is HydraMaster P/N 000-052-281.
If you are ordering for an existing machine, check the model and serial number on the data plate and send them to us. We will confirm the part against the parts list for your machine before you order.
Confirmed against the HydraMaster Boxxer 421 machine assemblies and parts lists (drawing set D-5057 / D-6861). Fitment to other HydraMaster models has not been verified from a parts list — ask us if you are ordering for a different machine.
Same as BR319
TITAN 425 fitment
Named in the parts listing for the HydraMaster TITAN 425:
- AWDS Universal Kit Assembly (000-079-220 Rev E) — 1
Verified from the HydraMaster TITAN 425 parts listing, MAN-47791 Rev A.
