The HydraMaster TITAN 575HP is the largest machine in the TITAN range — a liquid-cooled, high pressure slide-in truckmount built for continuous commercial and restoration work.
Why professionals choose it
Hydramaster TITAN 575HP “Tough as Nails” TITAN quality with a sleek new design. More intuitive and easier-to-use panel directions and graphics make it easier to train new technicians and easier to maintain. Enhanced appearance makes an impression on your professionalism to your cleaning or restoration customer. Hydramaster builds Truckmounts that match your perseverance at delivering optimum performance to your customers. Legendary performance and reliability from the innovation leader since 1971.
Key features
- Kubota® 32.5 HP Liquid Cooled Engine with 3-year manufacturer’s warranty
- Keyless electronic ignition
- Exceptionally rigid cast-iron block
- 3 cylinder OHV design
- Fuel-efficient technology, 1.7 GPH at 300 PSI
- Operating at 3000 RPM
- General Pump EPHT1813S piston pump 15.14 L/min (4.0 GPM)
- Up to 2,000 PSI, heated
- 4007 Dominator™ Tri-Lobe Blower HydraMaster exclusive design
- Dual oil bath design with sight-level windows
- Durable helical gear drive
- 400+ CFM
- Stainless steel multi-stage heat exchanger — captures heat from engine, blower and exhaust
- MAX-TEMP Control
- Cerakote® exhaust coating — retains heat inside the exhaust and radiates less into the van, for a cooler van, longer life from surrounding belts and hoses, and better corrosion protection
- Cleaning solution temperature 110–129 °C (230–265 °F) under normal carpet cleaning conditions
Ideal applications
- Dual Wand Cleaning
- Residential and Commercial Carpet Cleaning
- Pressure Washing with full waste recovery capabilities
- Upholstery Cleaning
- Concrete, Stone, Tile and Grout Cleaning
- Water Extraction
Specifications
- Subcategory: Slide-In
- Dimensions: 66 cm W × 99 cm H × 114 cm D
- Weight: 408 kg
- Engine: WG 972 Kubota 32.5HP liquid-cooled
- Ignition: Electric keyless start
- Vacuum Blower: Dominator™ 4007 Tri-Lobe, HydraMaster exclusive design, 400+ cfm, dual oil bath
- Pump: General Pump EPHT1813S piston pump, 15.14 L/min (4.0 GPM), up to 2,000 psi heated, electric clutch control
- Maximum solution temperature: 129 °C (265 °F)
- Chemical System: Last-step chemical injection, meter controlled
- Heating System: Stainless steel multi-stage heat exchanger with ADC temperature control
- Recovery Tank: 264-litre MaxAir™ recovery tank; aluminium, baked-on powder-coated finish, includes stainless steel filter and filter basket, 93cm L x 27cm W x 79cm H, 50 kg
- Wand Capacity: Dual
- Fuel Consumption: 6.4 L/h (1.7 GPH at 300 PSI)
- Uses: Residential and Large Commercial
What is in the box
Machine Power Console, Vacuum Recovery Tank, 2" Evolution Wand, 2 x 15 Metres Premium 2 Inch Vacuum Hose in cuffs and joiners, 2 x 15 Metres Premium High-Pressure Solution Hose Inc. quick connects, 3 Metres 1.5 Inch Wand Whip Hose, 3 Metres 1.5 Inch Waste Dump Hose, 20 Litre Chemical Jug, Battery Box (battery not included), 15 Metres Water Supply Hose, Fresh water hook up, Pressure Washing Gun & 7.5 metre hose kit, Installation and bolt down kit, Installation instructions, User manual, Import freight by sea, Transit insurance, Customs clearance, Duty, Handling charges and GST.
Package options
- 380 ltr waste tank upgrade
- AWDS APO Waste Pump Out System
Comparing the HydraMaster truckmount range
These machines separate on engine, blower airflow, pump pressure and achievable solution temperature.
| Machine | Engine | Vacuum | Solution pump | Solution temp |
| Boxxer 318HP | 18 HP Vanguard, 3.8 L/h | 315 CFM, max 12 in. Hg | 1,500 psi, 13.2 L/min | to 100 °C |
| TITAN 375 | 23 HP Vanguard, 4.2 L/h | 350+ CFM Competitor 4005TL | to 2,000 psi | to 116 °C |
| TITAN 425 | 23 HP Briggs & Stratton, 4.2 L/h | 350+ CFM Tuthill 4005 | 1,000 psi, 15.1 L/min | Heat exchanger |
| TITAN 575HP | 32.5 HP Kubota liquid cooled, 6.4 L/h | 400+ CFM Dominator 4007 | 2,000 psi, 15 L/min | 110–129 °C |
| TMTG4000 | 23 HP Briggs & Stratton, 4.2 L/h | 350+ CFM Tuthill 4005, max 14 in. Hg | 1,000 psi, 13.2 L/min | Finned tube |
Where the decision sits. Airflow determines drying time and how far you can run hose. Pump pressure matters for hard surface work — around 1,000 psi is enough to clean tile and grout, so every machine here is capable of it, and higher pressure gives more margin on heavily soiled or textured surfaces. Solution temperature does the cleaning, and a liquid-cooled engine sustains it under continuous load where air-cooled tapers.
On size and weight. Published console dimensions and weights are not measured consistently between models and do not always match the machines as supplied here. Tell us your vehicle and we will confirm the actual figures before you order.
Engine, blower, pump and temperature figures are from HydraMaster’s published documentation. The IN THE BOX package on this page is what Carpet Cleaners Warehouse supplies and differs from HydraMaster’s standard equipment list — ours applies to your order.
What else you will need
- RX20 NEXTGEN rotary extractor — rotary extraction for commercial carpet, driven from the truckmount
- Automatic Wastewater Disposal System — pumps waste to an on-site sanitary connection instead of returning to dump
- Hose, wands and hard surface tools to suit the work — ask us to spec a kit against the machine
Warranty
The Kubota engine carries a 3 year manufacturer warranty. Other components vary. This does not exclude, restrict or modify your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
Documents
- TITAN 575HP product information sheet (PDF)
- TITAN 575 user manual, MAN-47792 Rev B 2021 (PDF)
- TITAN 575 parts and assemblies, Rev B 2021 (PDF)
- TITAN 575 owner’s guide and maintenance schedule, MAN-47793 Rev A (PDF)
Frequently asked questions
Is the package the same as HydraMaster’s standard equipment list?
No. The IN THE BOX list on this page is what we supply in Australia, and it differs from the manufacturer’s standard equipment — hose lengths and tools in particular. Where the two disagree, ours applies. Ask us for written confirmation before ordering if it matters.
What vehicle do I need, and what does the machine weigh?
Ask us. Published dimensions and weights are not measured the same way between models — some are console only, some include the frame — and they do not always match the machines as supplied here. Tell us your vehicle and we will confirm the actual figures.
Who installs it?
We do, or an authorised representative by prior arrangement. Installation covers mounting, exhaust routing, plumbing and electrical, and it is not a job to hand to a general workshop.
There are warranty ramifications if it is installed incorrectly. A machine damaged by a poor installation is not a warranty claim, so arrange the install with us before the machine arrives rather than after.
Does higher pressure mean better cleaning?
Not on carpet. Carpet cleaning happens at relatively low pressure with heat and dwell doing the work. On hard surface, around 1,000 psi is enough to clean tile and grout — higher pressure gives more margin on heavily soiled or textured surfaces and lets you work faster, but it is not what makes the job possible.
Why does airflow matter more than it looks?
CFM at the machine sets recovery at the wand, and recovery sets drying time. It also determines how far you can run hose before performance falls away, which on multi-storey or long-run commercial work decides whether the job is practical.
What warranty applies?
Manufacturer warranty terms vary by component — the 575HP Kubota engine carries a 3 year manufacturer warranty, for example. This does not exclude, restrict or modify your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
