For customers who own the Injectidry HP Floor Drying Package and want to dry walls, ceilings, and cabinets.
The AH-CWK-2A kit adds the hoselines, tubing, injectors and fittings needed to run wall, ceiling and cabinet cavity drying from the HP blower you already have. Injectidry sells it as the upgrade for Floor Drying Package (FDP) owners. It contains no blower.
Includes:
- 12 x AH3 Activehoses ®
- 1 x HP-TUB 3/8"ID x 1/2" OD x 200' YL Tubing
- 2 x SY-125 Small Y's
- 50 x SM-NIP-CAP 3/8"ID Soft (Red) Nipple Caps
- 50 x TUB-CON 3/8" x 3/8" OD Tubing Connectors
- 150 x WI-BLK 3/16" OD Black Wall Injectors
- 10 x EC-125 1.25" Push to connect End Cap Plugs
- 01 x CB1 General Purpose Carry Bag
- 24 x HC3 1.5" Hose cuffs
- 12 x HC-125 1.25" Hose Connectors
This contents list matches Injectidry's US distributor Dry Air Technology item for item.
Who This Kit Is For
- Owners of the Injectidry HP-PLUS Floor Drying Package (or an earlier HP floor package) who now want to dry wall, ceiling and cabinet cavities.
- Not for Direct-It or Adaptidry users — those systems run on air movers and use different hoses and penetrators.
- Not a starting point without a blower. If you do not own an HP blower, ask us about the complete HP-PLUS Wall and Ceiling Package instead.
What Each Part Does
| Part | Qty | Role | Sold separately by CCW |
|---|---|---|---|
| AH3 Active Hoseline, 6 ft | 12 | Each hose has ten 3/8 inch tubing ports (Injectidry) | Yes |
| HP-TUB tubing, 3/8 in ID x 1/2 in OD x 200 ft | 1 | Cut into lengths from each port to an injector | Yes |
| WI-BLK wall injectors, 3/16 in OD | 150 | Fit into the drilled holes at the end of each tube | Yes (each) |
| TUB-CON tubing connectors | 50 | Join two lengths of 3/8 inch tubing | Yes (each) |
| SM-NIP-CAP nipple caps | 50 | Close unused 3/8 inch ports | Yes (each) |
| EC-125 end cap plugs, 1.25 in | 10 | Close unused 1.25 inch push-to-connect ports | Yes (each) |
| HC-125 hose connectors, 1.25 in | 12 | Push-to-connect hose connections | Listed as HC-125 hose barb (each) — confirm type with us |
| HC3 hose cuffs, 1.5 in | 24 | Hose cuffs for the 1.5 inch HP hose — Injectidry's HP-60 guide lists two cuffs and one connector per active hoseline | Not listed — ask us |
| SY-125 Small Y, 1.25 in | 2 | Splits a 1.25 inch run in two | Not listed — ask us |
| CB1 General Purpose Carry Bag | 1 | Storage and transport (Injectidry: 42 x 36 in) | Not listed — ask us |
Setting Up for Walls, Ceilings and Cabinets (Injectidry HP-60 Guide)
- Extract first. Injectidry warns that bulk water through the HP blower can severely damage it and will void the warranty — run the Water Separator on negative jobs for at least the first 24 hours.
- Walls: score a light line at the top of the skirting and drill beneath it.
- Cabinets: drill through the kick plate, or inside the cabinet where it will be out of sight, using a 1/4 inch bit.
- Ceilings: start the hole straight, penetrate the plasterboard only slightly, then angle the rest at 45° or more.
- Tubing: 18–20 inches (about 460–510 mm) for general use; 6 inches (about 150 mm) if the hoselines hang from the ceiling or upper walls. At 20 inches, the 200 ft roll gives about 120 lengths — enough for the 120 ports on 12 hoselines.
- Cap every unused port — 3/8 inch with nipple caps, 1.25 inch with end caps. An open port is a leak.
- Photograph the hole locations before and after, and agree the make-good with the customer before drilling.
Specifications
| Brand | Injectidry |
|---|---|
| Injectidry part number | AH-CWK-2A |
| Requires | Injectidry HP blower and Main W (supplied with the HP Floor Drying Package) |
| Active hoselines | 12 (120 tubing ports) |
| Wall injectors | 150 |
| Electrical | None — passive hoses and fittings |
| CCW SKU | IDAHCWK2A |
Frequently Asked Questions
Does it work with the HP-PLUS 240V Floor Drying Package?
The kit is Injectidry's upgrade for FDP owners and uses the same HP hose and push-to-connect system. Tell us which HP blower you have and we will confirm before you order.
How many hoselines can one blower run?
Injectidry does not publish a maximum number of active hoselines per blower. Ask us for guidance on your job size.
Why 150 injectors for 120 ports?
Spares. Injectors are small and easily lost or damaged on site.
Can I buy the parts one at a time instead?
Most of them, yes — see the table above. The hose cuffs, Small Ys and carry bag are not listed separately; ask us.
Does it include a Water Separator?
No. The Water Separator is sold separately and is recommended for every negative-mode job.
Related Products
- Injectidry HP-PLUS 240V Floor Drying Package
- Injectidry Water Separator
- Injectidry Main W Connector
- Injectidry HP Silencer
- All Injectidry parts
Injectidry parts are system-specific. Tell us which blower and package you own and we will confirm the kit before you order.
