The Injectidry Protect-It is a heavy-duty polyethylene drip pan that sits under a dehumidifier on the job. If the unit's pump fails, a pump-out hose pops off or a tank overflows, the water goes into the pan rather than the floor — or through it to the ceiling below.
Protect yourself from secondary damage with this heavy-duty polyethylene pan. It holds 26 litres of water and fits the most common dehumidifiers used.
- Made of durable polyethylene
- Provides 26 litres of emergency overflow protection
- 635 mm x 635 mm inside dimensions
- Raised feet allow for airflow
The Protect-It tray will work with:
- Dri-Eaz Dehumidifiers
- Phoenix Dehumidifiers
- And Many others
Important: Check the Footprint
The fitment list above is CCW's. Injectidry does not name compatible models — it publishes the pan's size. What matters is that your dehumidifier's base, wheels and feet sit fully inside 635 x 635 mm, with the unit level. On its published dimensions (457 x 318 mm), the Dri-Eaz BD2500 footprint sits well inside. For any other unit, measure the base before you order.
Why Use a Drip Pan
A dehumidifier left running overnight in an empty house is the one piece of drying equipment that collects water. Injectidry's own description is simple: it protects floors and ceilings below. That matters most on upper floors, on finished timber and anywhere a second water event would turn one claim into two.
The pan is emergency protection, not a reservoir. It buys time. At the 91 L/day CCW lists for the Dri-Eaz LGR 7000XLi, 26 litres is roughly seven hours of full output — so a failed pump on a wet job can still overflow the pan overnight.
Using It on the Job
- Place the pan on a level floor and set the dehumidifier inside it.
- Run the pump-out hose to a sink, drain or container, and secure it so it cannot pull free. Check both male and female pump-out couplers are fully engaged.
- Check the pan at every monitoring visit. Water in the pan means something has failed — find out what before you leave.
- Empty the pan carefully before moving the unit. Tip it from a corner, and keep water off the floor you are protecting.
- Rinse, dry and stack the pan for transport.
Specifications
| Brand | Injectidry |
|---|---|
| Injectidry part | P-IT |
| Inside dimensions | 635 x 635 mm (25 x 25 in) |
| Depth | 2.75 in (about 70 mm) — Injectidry price list |
| Capacity | 26 litres (7 US gallons, Injectidry) |
| Material | Polyethylene |
| Feet | Raised, for airflow |
| Sold as | Each (Injectidry packs in cases of 10) |
| CCW SKU | IDP-IT-EACH |
Frequently Asked Questions
Will it fit my dehumidifier?
If the unit's base sits inside 635 x 635 mm and it stands level, yes. Injectidry does not publish a model list. Send us the make and model and we will check the published footprint for you.
Does the pan replace the dehumidifier's pump?
No. The dehumidifier should still drain through its pump and hose. The pan catches water only when that fails.
How much water will it hold before it overflows?
26 litres (7 US gallons) with the pan level. Less if the floor slopes — level the pan first.
Can I buy them in a case?
Injectidry supplies the Protect-It in cases of 10. CCW sells them each. Ask us for a price on a full case if you are fitting out a fleet.
Related Products
- Dri-Eaz LGR 7000XLi Dehumidifier 230V
- Dri-Eaz BD2500 LGR Dehumidifier 230V
- Dri-Eaz Male Pump-Out Hose Coupler
- Dri-Eaz Female Pump-Out Hose Coupler
- Dehumidifiers
- All Injectidry parts
Not sure the pan suits your dehumidifier? Send us the make and model and we will check the footprint before you order.
