Actichem Oxyboost Plus is a super concentrate, oxidising compound designed for use as both an additive to cleaning solutions and a stand-alone product. Oxyboost Plus provides powerful oxidising activity to cleaning solutions, with particular applications in fire restoration, stain removal, and deodorising. It derives its oxidising capability from potentiated Sodium Percarbonate, which provides maximum oxygen release even at ambient temperatures. The ready-to-use Oxyboost Plus solution yields an alkaline solution. It therefore offers unique performance for both hard and soft surface cleaning applications where the oxidising ability of Hydrogen Peroxide is limited.
BENEFITS
- Stain Removal – Oxyboost Plus provides powerful stain removal, especially on tannin and colour stains such as Fanta, cordial, grass, blood, and many other organic stains.
- Cleaning Booster – The addition of Oxyboost Plus to your cleaning solution significantly enhances cleaning results, as its oxidising and destaining power removes many soils that would otherwise be left behind.
- Brightens Colours – Oxyboost Plus will enhance and brighten the colours of fabrics and carpets, and overcome dullness and greying.
- Fibre Safe – Oxyboost Plus is safe for use on all synthetic and most delicate fibres and fabrics, including coloured fabrics.
- User-friendly - low-odour formula, pleasant to use.
Applications & surface suitability
Safe and ideal for use on practically all water-cleanable surfaces, including painted walls, ceilings, carpets, soft furnishings, lacquered wood, metals, tiles, lino, natural stone, and concrete. Care should be taken with pH-sensitive substrates, such as natural fibres. It is recommended that a neutralising acid rinse be performed after cleaning.
HOW TO USE
Always pretest in an inconspicuous location for substrate sensitivity to chemicals.
Best performance is obtained when used in hot solutions.
Dilutions
- Add 10-20g Oxyboost Plus to 1 litre of water or a ready-to-use cleaning solution.
- For heavy-duty conditions, up to 30g/L can be added.
- Oxyboost Plus should not be added to acidic solutions, deodorisers, chlorine or enzyme products.
- Oxyboost Plus can be added to fire restoration detergents, carpet & upholstery presprays, alkaline tile-cleaning detergents, and water-based degreasers.
- Warm or hot water/cleaning solutions will improve performance.
- Stir well and use the solution within 30 minutes.
Application
Hard surface & carpet cleaning applications:
Cover areas not being cleaned. Only apply the solution to an area that can be cleaned and rinsed within 30-40 minutes. Follow typical hard surface, carpet & fire restoration cleaning techniques.
- Apply the solution to a workable area using a sprayer, sponge or scrubber machine.
- Agitate and allow 15 to 30 minutes dwell time.
- Rinse the surface thoroughly using clean water. Carpets and soft furnishings are best rinsed using carpet wet extraction equipment using a 1:100 Rinse Pro solution.
Spot removal from carpets and fine stone:
Add Oxyboost Plus to a warm/hot prespray or tile cleaning solution (non-acidic). Neutral pH product solutions generally work best. The Oxyboost Plus solution can also be made up using water only.
- Apply the solution to the affected area.
- Agitate, allow 15 to 30 minutes of dwell time, and re-agitate.
- Rinse the surface thoroughly using clean water. Carpets and soft furnishings are best rinsed with wet-extraction carpet equipment using a 1:100 Rinse Pro solution.
Tip: Spot removal on marble and other porous, hard surfaces can also be achieved by applying one scoop of OxyBoost Plus powder directly to the surface. Apply a little hot water, then use a non-scratch scourer to mix and scrub the spot until a paste forms. Allow 10-15 minutes dwell time. Scrub again and rinse with clean water.
Garments & loose furnishings:
Ensure items are water-washable—pre-check for special washing directions provided by the manufacturer.
- Mix up a soak solution of 200-500ml Fire Fix per 10 L of warm/hot water (or commercial laundry liquid/powder). Add 50-100g OxyPlus. Mix well.
- Soak affected garments and loose furnishings for 1 to 4 hours.
- Rinse well in clean warm water.
- Garments suited to machine washing should then be laundered as usual. Loose furnishings should be rinsed in a warm 1:200 solution of Rinse Pro.
Colour: White (powder)
pH: 11
Fragrance: None
Dilution: 10 – 20 grams per litre of ready-to-use chemical
Safety profile: Class 5.1 Oxidising Agent
Pack sizes: 1Kg & 4.5kg
SKU: AP446.01
