Product Overview
DEMA FOAMit portable air-powered foamer, 25 US gallons (94.6 litres). It runs on compressed air and turns a pre-mixed chemical solution into thick, clinging foam for industrial and institutional foam cleaning.
Features
- Draws from pre-mixed solution; powered by compressed air.
- Rotationally moulded tank with natural colour for easy visibility of product levels.
- Hinged back plate for tool-free access; quick-change pump.
- Needle valve to adjust foam from wet to dry.
- Front-facing drain for easy emptying.
- In-line strainer to protect the pump.
- Two 25.4 cm (10 inch) non-marking wheels and two 7.6 cm (3 inch) locking casters.
Important — Chemical and Seal Compatibility
FOAMit states that chemical products used with this equipment must be formulated for this type of application and compatible with the unit materials and pump seals. Check the SDS for your chemical against the seal material before use, and flush the unit with fresh water when changing between chemistries.
CCW lists this unit for meth decontamination foam products such as Neutrasol, Apple Environmental, Crystal Clean and Decon7. Compatibility depends on the product and the pump seal material, so confirm each chemical against its SDS before use.
Specifications
| CCW SKU | D925-1 |
| Power type | Compressed air |
| Air requirement | 40–80 psi (2.8–5.5 bar) at 5–10 cfm |
| Chemical pickup | Draws from pre-mixed solution (one product) |
| Suction line | 9.5 mm (3/8 inch) ID |
| Capacity | 94.6 litres (25 US gallons) |
| Discharge hose | 9 m (30 ft), 19 mm (3/4 inch) ID |
| Wand/tip | 17.8 cm (7 inch) stainless steel wand with zero tip and ball valve |
| Output distance | 7.6–9.1 m (25–30 ft) |
| Output volume | 75.7–170.3 L/min (20–45 gal/min) of foam |
| Flow rate | 7.6–9.5 L/min (2–2.5 gal/min)* |
| Pump seals | Santoprene, Viton or Kalrez |
| Wheels | Two 25.4 cm non-marking wheels, two 7.6 cm locking casters |
| Liquid temperature | 4.4–37.8°C (40–100°F) |
*Flow rates are based on chemical with the viscosity of water and factory air pressure settings.
Need the operation manual? Ask us and we will send the current FOAMit copy.
Frequently Asked Questions
What compressor do I need?
One that supplies 40–80 psi at 5–10 cfm.
How far does it throw foam?
7.6–9.1 m (25–30 ft).
10 or 25 gallon?
The 25 gallon unit has a longer, wider hose and throws foam further for large areas. The 10 gallon unit is lighter to move between rooms.
Is there a replacement poly wand?
Yes — the DEMA FOAMit 10 Inch Poly Wand with Spray Tip for 25 Gallon Foamer.
Related Products
- DEMA FOAMit 10 Inch Poly Wand with Spray Tip for 25 Gallon Foamer
- DEMA FOAMit Pump-Up Foamer, 5 Litre
- DEMA FOAMit Pump-Up Foamer, 10 Litre
- DEMA FOAMit Portable Fogger, 38 Litre (10 Gallon), 2 Nozzles
- DEMA FOAMit Portable Fogger, 38 Litre (10 Gallon), 3 Nozzles, Telescoping Mast
- DEMA FOAMit Portable Air-Powered Foamer, 38 Litre (10 Gallon)
What we see in the field
95 litres sounds wonderful when you're sick of refilling a small foamer. Less wonderful when it's full and won't get through the route to the work area. Check access and compressor placement before filling it.
Tell us the chemical you plan to apply and the size of the area, and we will help you choose the right unit and seal material.
You might also like
