A 38L pneumatic portable fogger that operates on compressed air.
- Draws from pre-mixed solution.
- Powered by compressed air.
- 2 nozzles mounted on the unit handle
- Droplet size: 15 microns at 50 psi (3.4 bar).
- Polypropylene and Kynar nozzle construction
- A full tank of solution will supply the unit for approximately 1.5 hours.
- Optional timer with delay functionality - start the unit and leave the room before it begins fogging.
- The hinged back plate provides tool-free access to components.
- Quick-change pump.
- Natural colour tank for easy visibility of product levels.
- Hinged lid.
- Front-facing drain.
- In-line filter to protect the pump from debris.
Requirements
| COMPRESSED AIR | 50 psi (3.4 bar) with 7 cfm (198.3 l/min) |
|---|---|
| LIQUID TEMPERATURE RANGE | 40-100˚F (4.4-37˚C) |
| CHEMICAL COMPATIBILITY | Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department. |
Specifications
| POWER TYPE | Compressed air |
|---|---|
| CHEMICAL PICKUP TYPE | Draws from pre-mixed solution |
| NUMBER OF PRODUCTS THE UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) | One product |
| SUCTION LINE LENGTH/DIAMETER | 9.5 mm inside diameter |
| CAPACITY | 47.32 litres |
| FLOW RATE* | 14 litres/hour at each nozzle |
| PUMP SEALS | Santoprene, (optional Viton, or Kalrez) |
| DROPLET SIZE | 15 microns at 50 psi (3.4 bar) |
| COVERAGE AREA** | 1 litre of solution will cover approximately 28.3 cubic meters, up to a system max of 1340 cubic meters. |
| RUN TIME FROM FULL TANK** | Approx. 1.5 hours |
| NUMBER OF NOZZLES | 2 nozzles |
| WHEEL TYPE | Two 25.4 cm non-marking wheels |
| RUN TIMER | optional (allow 4-5 months delivery) |
