Actichem Emulsifier Plus is a premium-quality extraction detergent liquid. This innovative emulsifier formulation has a well-buffered pH and a unique combination of solvents, detergents, and water softeners for cutting through the toughest soils, taking the “sweat” out of carpet cleaning. It is perfect for the hottest truck-mount cleaning systems and withstands ultra-high heat, thereby minimising residual deposits and clogged spray jets.
This product is an excellent replacement for Powerclean Xtract
Benefits:
- Premium Cleaning Action – Got the muscle to cut through stubborn oily soils—Emulsifies tracked-in particulate soiling, releasing it for efficient extraction.
- High Heat Stable – Stays in solution even at the hottest truckmount temperatures, helping eliminate residual deposits and clogged spray jets.
- Fibre Safe – Safe for use on stain-resistant fibres. Ideal for use on all synthetic carpeting.
- Equipment Safe – Specialty corrosion inhibitors protect your equipment components.
- The Product of Choice – Ultra-concentrated liquid formulation provides smarter cleaning at a lower cost. Although suitable for truck mount use, it is the ideal choice for portable users.
- Mixes easily - mixes with hot or warm water and has a fresh fragrance.
- Versatile – Emulsifier Plus is ideal for use as a one-step emulsifying extraction cleaner or as an extraction detergent following a prespray treatment for heavily soiled carpets.
Application areas and surface suitability
Emulsifier Plus is a carpet cleaning extraction detergent.
How to use
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Observe all safety directions and read the SDS before use.
Dilutions
Portable Extractors
- Mix 12ml with 10 L (1:800) when cleaning wool and stain-resistant carpets, or when using the two-step process.
- Mix 25ml / 10Lt (1:400) for heavy soil conditions using the single-step process.
Truck-Mounted Extractors
- Mix 250ml with 10 L of water to make the truck mount concentrate.
- Set the flow meter to 2 to 4 gallons per hour for cleaning wool and stain-resistant carpets, or when using the two-step process (prespray followed by rinse extract).
- Set the flow meter at 4 to 8 gallons per hour for heavy soil conditions using the single-step process.
Application
Single-step cleaning method.
(Light to medium soiling)
- Prepare the carpet by thoroughly vacuuming the area to be cleaned.
- Using the dilution rates specified above, clean/extract the carpet or upholstery fabric using slightly overlapping strokes.
- Apply carpet protector if required.
- Realign the carpet or upholstery fabric fibres and assist the drying process.
Two-step cleaning method.
(Medium to heavy soiling)
- Prepare the carpet by thoroughly vacuuming the area to be cleaned, then applying the relevant prespray treatment, following the suggested dwell time and agitation.
- Using the dilution rates specified above, rinse the carpet or upholstery fabric using slightly overlapping strokes.
- Apply carpet protector if required.
- Realign the carpet or upholstery fabric fibres and assist the drying process.
Notes:
Move the wand more slowly over areas that are more heavily soiled.
Use a dry stroke to speed up drying.
Colour: Deep red/tan
pH: 9.5 – 9.8
Fragrance: Fruity
Dilution: 1:400 – 1:800
Safety profile: Non-hazardous
SKU: AP455.05
