Actichem Stain Fix is a powerful stain removal system for removing colour stains caused by cool drinks, wine, food, beverages, and organic substances. The two-part system allows controlled use of activated hydrogen peroxide, providing radical-strength stain-removal properties in a short timeframe.
Benefits
- Stain Removal – Stain Fix employs the power of Hydrogen Peroxide to remove the colour from the toughest dye stains, including wine, cool drinks.
- Two-Part System – The two-part system ensures maximum peroxide performance for the most stubborn stains.
- Versatile – Stain Fix removes colour from stains caused by juice, coffee, tea, alcoholic beverages, cool drinks, urine, cellulosic browning, foods and organics.
- Coloursafe – Stain Fix is safe for use on colourfast fabrics and carpets, but pretesting is recommended to ensure colour stability.
- Fibre Safe – Stain Fix is safe for use on natural and synthetic fibres; however, delicate fabrics must be pre-tested for fibre stability before use.
Application areas and surface suitability
Carpets and fabric stain removal
Even stronger stain removal can be achieved by using the iron method. However, extreme caution should be exercised as colour loss or fibre damage can occur.
Note: Stain Fix is sensitive to heat and light. Store it out of direct sunlight and avoid storing it in your van for lengthy periods. Replace it at least monthly.
How to use
Always pre-test in an inconspicuous location for substrate sensitivity to chemicals. Some fabrics and delicate carpets may experience colour loss.
Dilutions
Mix equal amounts of Part A and Part B in the provided mixing bottle.
Application
- Remove as much of the stain as possible by steam extraction, then perform extra dry vacuum strokes.
- Mix equal amounts of Part A and Part B in the provided mixing bottle.
- Apply the solution directly onto the stain and agitate briefly.
- Allow 10 to 30 minutes reaction time for stain removal.
- Some stains will respond within 5 to 10 minutes, whilst others may require up to 30 minutes.
- Extract or blot with a clean white absorbent cloth. Do not rub.
- Repeat the process if required.
- Rinse the area with clean water or Rinse Pro.
Special application notes for using heat with Stain Fix
- Apply Stain Fix to the affected area, then gently agitate with a brush.
- Cover the area with a white terry towel.
- Using a steam iron, iron over the area cautiously.
- Examine the terry towel to see if the colour has transferred onto the towel.
- Cover the area again with a clean patch of the terry towel and repeat the process.
- Take care to watch for colour loss in the carpet.
Colour: N/A
pH: 9.8, ready to use
Fragrance: None
Dilution: 1:1
Safety profile: Non-hazardous
SKU: AP498.05
