Sonitron Soniquat is a blended quaternary ammonium compound concentrate. The safety data sheet declares quaternary ammonium compounds (benzyl-C12–16-alkyldimethyl chlorides) at 10–30%, which makes the concentrate corrosive — see Safety below.
Sonitron supplies it to the restoration trade, and names fogging in water damage restoration among its uses.
What CCW Does and Does Not Claim
Soniquat is not listed on the Australian Register of Therapeutic Goods (CCW searched the register on 11 November 2026 under the product name and the supplier's and manufacturer's names). For that reason CCW makes no sanitising, disinfecting or germ-kill claim for it, and it should not be used where a job specification, insurer or health authority calls for a listed disinfectant.
If you need a listed product, see Actichem Percide 5ltr (TGA Listed) or ask us.
Directions for Use
Sonitron does not publish dilution rates or application methods for Soniquat on its website. Follow the directions on the container label, and ask us for them if you need them before you order.
Never apply or fog the concentrate neat. If you plan to fog a diluted solution, follow the label, your fogger manufacturer's directions and the SDS, keep the area unoccupied, and wear the protective equipment the SDS specifies.
Safety
Sonitron's safety data sheet (SDS 5062, revision 3, 3 February 2026) classifies Soniquat as hazardous. Signal word: Danger.
- Causes severe skin burns and eye damage.
Wear tight-fitting chemical splash goggles or a face shield, protective gloves and protective clothing when handling the concentrate, and use respiratory protection where ventilation is inadequate. If it contacts skin or eyes, rinse with water immediately and get medical attention. Read the full SDS before use.
Specifications
| Brand | Sonitron |
|---|---|
| SKU | SON1281-05 |
| Pack | 5 L (Sonitron also packs 20 L) |
| Type | Quaternary ammonium compound concentrate |
| Declared ingredient | Quaternary ammonium compounds, benzyl-C12–16-alkyldimethyl, chlorides 10–30% (SDS) |
| Appearance | Clear liquid, characteristic odour (SDS) |
| pH | 8.5 (SDS) |
| Specific gravity | 1.04 (SDS) |
| Hazard classification | Skin corrosion category 1B; serious eye damage category 1 (SDS) |
| Transport | Dangerous goods: UN 1760, Class 8, Packing Group II (SDS) |
| ARTG listing | None found (register searched 11 November 2026) |
| Dilution | Not published on Sonitron's website — see the container label |
Frequently Asked Questions
Can I use it as the disinfectant step on an insurance or Category 3 water job?
Not on the strength of this page. It is not ARTG listed, so use a listed disinfectant where the job calls for one.
Why does it carry a shipping surcharge?
Soniquat is a Class 8 corrosive for transport, so a dangerous goods surcharge applies.
What dilution do I use?
Sonitron does not publish a rate on its website. Use the rate on the container label.
Documents
Safety Data Sheet (Sonitron, SDS 5062, revision 3, 3 February 2026)
DG Shipping Surcharge AppliesRelated Products
Not sure whether this is the right product for the job? Tell us what the job specification asks for and we will help you choose before you order.
