PMF solution hose for upholstery tools, 12 inch
A short, 12 inch (305 mm) solution hose for PMF upholstery tools. PMF builds its high-pressure detailers with a 1 ft high-pressure whip and its low-pressure versions with a 6 inch whip, so check the length on your tool before ordering.
Specifications
| Length | 12 inches (305 mm) |
|---|---|
| Application | PMF upholstery tools |
A wear part worth carrying
This hose flexes every time the tool is used and carries hot solution under pressure. It usually fails at the fitting, mid-job, and it takes the tool out of service until it is replaced. It is small enough to keep a spare in the van.
Fitment
Supplied for PMF upholstery tools, including the AW45, AW50A and AW51A. Hose length and fitting arrangement vary between tool models and generations. Tell us the tool model and we will confirm this is the right hose before you order.
Frequently asked questions
My tool has a 6 inch hose. Will this fit?
PMF uses a 6 inch whip on its low-pressure tools. Fitting a 12 inch hose changes how the tool handles, so ask us first.
What pressure is it rated to?
We have not confirmed a pressure rating for this hose. Do not use it above the rating of the tool's valve, and ask us if you need a confirmed figure.
How do I know it needs replacing?
Replace it if you see weeping at a fitting, cracking, bulging or abrasion through the outer cover.
What we see in the field
A short upholstery solution hose can fail where it bends beside the tool, even though the middle looks perfect. If there's a weep, inspect the hose ends and crimps with the system safely depressurised. Match both fittings and the routing before fitting the replacement.
Tell us the wand or tool you are working on and we will confirm the part before you order.
