PMF 4.5 inch stainless upholstery tool, 500 psi, internal jets
The wider stainless upholstery tool in the PMF range, with internal jets (PMF U1564S series). CCW supplies it with the PMF V1245B brass valve fitted, rated to 500 psi.
Specifications
| PMF model | U1564S series internal spray detailer |
|---|---|
| Head width | 4.5 inch (114 mm) |
| Head material | Stainless steel, including nuts and bolts |
| Jet arrangement | Internal |
| Valve (as supplied by CCW) | PMF V1245B forged brass, 500 psi, high temperature |
| Vacuum release | Adjustable |
About the valve
PMF's factory version of this tool (U1564S series) comes with the 400 psi cast aluminium V1245 valve. CCW supplies it with the PMF V1245B forged brass valve fitted instead, rated to 500 psi and high temperature.
Where the extra inch earns its keep
On lounge cushions, mattresses and vehicle seats the wider head covers ground faster and leaves fewer overlap marks. On tight upholstery — dining chairs, arms, piping — it is the wrong tool, because you cannot keep the whole slot in contact and the vacuum breaks. Most operators carry both a 3.5 and a 4.5.
The 3.5 inch equivalents are the AW50A with a stainless head and the AW50-U1560PSB with a plastic head.
Service parts
- Valve: PMF V1245B forged brass valve, 500 psi
- Valve repair kit: PMF R1245 repair kit
- Solution hose: 12 inch upholstery tool hose
Frequently asked questions
Is this the same as the HyDry Deluxe 4.5 inch?
No. The AW51D HyDry Deluxe has a Hide-A-Hose and a V4N valve. This tool uses a separate solution whip and the V1245B.
What pressure can I run?
Up to 500 psi with the V1245B fitted.
Spray has gone weak on one side. What should I check?
Check the strainer and the internal jet first. Both can block without being visible.
What we see in the field
The wider 4.5-inch head is good for open upholstery panels, not necessarily the best thing for tight seams and piping. Keep an eye on whether the internal spray is even across the head. If one side is getting wetter than the other, stop and check the jet arrangement before the cushion tells you.
Tell us the machine and the pressure you run and we will confirm the right tool before you order.
