Replacement HEPA filter for the Injectidry Interceptor, the inline filter that sits between the wall or ceiling cavity and the HP blower.
Important: For Existing Interceptor Owners
The Injectidry Interceptor inline HEPA filtering system is not currently stocked as a new unit by CCW. These filters are listed for existing owners. Injectidry's HP-PLUS manual highly recommends an inline Interceptor HEPA device when running in negative mode. Ask us about Interceptor supply before planning new work around it.
What the Interceptor Is Protecting
Cavity air carries dust, insulation fibre and, on a category 2 or 3 loss or a mould job, biological material. The HEPA filter stops that going through the blower and out into the room the occupants are living in.
Change It on Condition
A loaded HEPA filter does not stop filtering; it stops flowing. The system quietly loses the airflow the drying plan assumed, and readings stall for no visible reason.
Fit pre-filters in front of it. A pre-filter costs a fraction of a HEPA and takes the bulk load, which is what makes the HEPA last.
Handle a Used HEPA as Contaminated Waste
Everything the filter caught is still in it. Bag it on removal rather than carrying it out through the house. On a mould or sewage job that is not a formality.
Specifications
| Brand | Injectidry |
|---|---|
| CCW SKU | IDRP-INT-FR1 |
| Fits | Injectidry Interceptor inline HEPA filtering system |
| HEPA class / dimensions | Not on file — ask us |
Frequently Asked Questions
Does it fit Direct-It systems?
It fits the Interceptor. Injectidry systems use different connections; tell us which system you run.
How often should I change it?
On condition: when airflow drops or the pre-filters have been neglected. Pre-filters extend its life.
Can I buy a new Interceptor?
Ask us about supply.
Injectidry parts are system-specific. Tell us which system you run and we will confirm the part before you order.
