Extension cable for Delmhorst RH and temperature sensors
A 3 foot lead between the sensor and the meter, so you can read the display comfortably while the sensor sits somewhere you cannot see or reach.
Fitment
- Connects the RH/T-S1 ambient sensor or the RH/T-S3 in-situ sensor to the meter
- Delmhorst HT-4000
- Delmhorst TotalCheck
- Delmhorst Navigator Pro
- Delmhorst QuickNav
Specifications
| Part number | RH/T-C1 |
|---|---|
| Length | 3 feet (0.9 m) |
| Function | Extends RH/T-S1 or RH/T-S3 sensor from the meter |
| Sold as | Each |
Where it earns its place
Reading a probe in a slab at floor level while crouching over the meter is awkward and slow. Reading one in a subfloor void, a wall cavity or a ceiling space without it is close to impossible. Three feet is not much but it is the difference between seeing the display and guessing.
Frequently asked questions
Which sensors does it work with?
Both — the RH/T-S1 ambient sensor and the RH/T-S3 in-situ sensor. It is the lead between sensor and meter, not a sensor itself.
Why would I need an extension?
So the sensor can sit inside a slab hole, a wall cavity or a duct while you read the display comfortably. Without it you are reading a screen at floor level, which on a full survey is the difference between a comfortable job and a sore back.
Does the cable affect accuracy?
No. It carries the sensor signal to the meter; the measurement is made at the sensor.
Not sure which part suits your meter? Tell us the model and what you are testing and we will confirm the right one before you order.
