The Wagner Smart Sensor 25 Pack includes 25 Rapid RH® L6 Smart Sensors and accessories, for when you already have the Total Reader® and need more Smart Sensors. The Rapid RH L6 Smart Sensors are factory calibrated using CMOSens® technology. Each Smart Sensor pack includes a NIST-traceable calibration certificate and comes in tamper-resistant packaging, so you know the sensors are calibrated, genuine Wagner Smart Sensors.
Note: does not include the Total Reader. The Total Reader is required to read the sensors; it comes in the CFP405 and WFP400 kits.
Important: Pack Contents
CCW's listing previously showed these contents:
- 5 ea. L6 Smart Sensors
- 10 ea. Extensions
- 5 ea. Protective Caps with Rubber Plugs and Butyl Gasket
- 5 ea. Stainless Steel Covers
- Certificate of Calibration
- Floor Map
- Instruction Manual
Wagner's current listing for the 25-pack (part number 880-R0040-011) gives: 25 × L6 Smart Sensors, 50 × extensions, 25 × protective caps with rubber plugs and butyl gasket, 25 × stainless steel covers, certificate of calibration and floor map. The five-sensor list above matches the quantities in Wagner's starter kit, not the 25-pack. We are confirming the contents of CCW's stock; ask us before ordering if the exact quantity matters to your job.
About the Sensor
Rapid RH® L6 sensors use a customised version of Sensirion's SHT35 humidity sensor with a ±2% accuracy tolerance at 50% and 90% relative humidity (RH). Wagner states this puts the L6 concrete RH testing system in direct compliance with ASTM F2170, and that standard SHT35 humidity sensors used in other concrete RH test systems start to deviate from the ±2% tolerance at RH levels as low as 50%.
What Each Part Does
- Smart Sensor: reads RH and temperature at the bottom of the test hole. It stays in the slab for the test period.
- Extensions: set the sensor at the correct depth in the hole.
- Protective cap: seals the hole so the sensor reads the slab, not the room.
- Stainless steel cover: protects the capped hole from foot and site traffic.
Specifications
| Sensor | Rapid RH L6 Smart Sensor (customised Sensirion SHT35) |
|---|---|
| Accuracy | ±2% RH at 50% and 90% RH (Wagner) |
| Test method | In-situ RH, ASTM F2170 |
| Reader | Total Reader (not included) |
| Wagner part number | 880-R0040-011 |
| CCW SKU | WE880-R0040-011 |
Frequently Asked Questions
Can the sensors be reused?
Each sensor stays in its test hole for the test. Plan on buying sensors in proportion to the number of tests you run.
Do I need a Total Reader?
Yes. The sensors are read with the Total Reader, which is not in this pack.
Does it work with older Rapid RH 4.0 or 5.0 systems?
These are L6 sensors for the L6 system. Tell us which Rapid RH system you have before ordering.
Tell us which Rapid RH system you run and how many tests you need, and we will confirm the right pack before you order. See the full Wagner range.
