The Flojet 2130 series is self-priming.

For vertical pump, mounting is sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

The built-in pressure switch automatically starts and stops the pump instantaneously when the discharge valve is opened and closed.
The pump head may be rotated in 90° increments to simplify plumbing.
Can run dry without damage and handle liquids up to 71°C (170°F).
Duplex Diaphragm Design eliminates troublesome shaft seal.
No metal contact with liquid being pumped.
Ball-bearing drive throughout the pump and motor assures longer pump life.
Excellent self-priming capability. The pump may be located several feet from the tank above or below the liquid level.
Powerful, permanent magnet motor with a low current draw and long life brushes.

FloJet Model No	Voltage	L/min max	PSI setting	Diaphragms	Valves
2130-232	230v AC	6.8	95	EPDM	EPDM

Suitable Uses	Liquid transfer, Reverse Osmosis, use with some chemicals and water used in carpet cleaning machines.
Suitable liquids	Many chemicals, seawater, fresh water, sugars, whisky and wine, etc
Warranty	12 months
Materials used	Pump Head: Polypropylene Diaphragms: EPDM Valves: EPDM
Electrical	Voltage: 230v AC Amp draw: 0.75A Watts: 170W Power lead length: 400mm
Pressure switch	Yes - Cut out pressure: 95 PSI (6.5 bar)
Internal Bypass	Yes
Self-prime	Up to 2.4m maximum
Suction Strainer	Not included
Liquid Temperature	71°C Maximum
Inlet/Outlet Ports	1/4" Female NPT thread
Connections Included	None
Fan cooled motor	No
Dimensions	Length: 230mm Height: 94mm Width: 100mm
Made in:	Mexico

SKU	111-085
Brand	Hydramaster

Air Pump Maxx 450 470 Javelin