PMF strainer check valve for 1/4 inch VeeJets
A combined strainer and check valve that fits behind a 1/4 inch VeeJet (PMF H45). The check valve stops the jet dripping when the trigger is released; the strainer keeps debris out of the orifice.
Specifications
| PMF part | H45 |
|---|---|
| Fits | 1/4 inch VeeJets |
| Function | Strainer with integral check valve |
Check the jet size before ordering
This is the 1/4 inch version. For 1/8 inch VeeJets use the PMF stubby check strainer for 1/8 inch VeeJets. They are not interchangeable.
Why fit one at all
A dripping jet puts water into the carpet where you did not intend it, which is where over-wetting starts. A partly blocked jet sprays off pattern and makes good cleaning look like a poor operator. A check strainer deals with both, and it is a cheaper part than either problem.
Frequently asked questions
Does it fit a TeeJet?
No. PMF lists separate strainer/check valves for TeeJets (H46 and H46-B). Contact us if your tool uses TeeJets.
How often should it be cleaned?
Whenever the spray pattern narrows, streaks or drips. Hard water and undissolved chemical block strainers faster.
Which 1/4 inch VeeJets do you stock?
We carry Spraying Systems 1/4 inch VeeJets, for example the 8002 and 9502. Match the jet size to your tool's specification.
What We See in the Field
[Technician's Note — replace before publishing: two to four sentences of first-hand CCW field experience relevant to this product. A pattern you see, a mistake customers make, or something learned from servicing or selling it. Not spec repetition, not a sales pitch, not invented.]
Tell us the wand or tool you are working on and we will confirm the part before you order.
