Pin retainer for long insulated pins
The retainer that clamps the long 608-series pins into deep-wall and slide-hammer electrodes.
Fitment
- Holds the 608 contact pin and the 608/001 contact pin
- Used with the 21-E deep wall probe
- Used with the 21-ET deep wall probe with tapped handle
- Used with the 18-ES slide hammer electrode
Specifications
| Part number | 305RET-0021 |
|---|---|
| Function | Holds 608 and 608/001 pins |
| Sold as | Each |
This is not the hammer electrode retainer
If you are replacing pin retainers on a 26-ES, 26-ED or 22-E, you want the 632 retainer instead. The two are not interchangeable — this one is sized for the longer 608-series pins.
Hand tighten only. Over-tightening strips the thread.
Not sure which part suits your meter? Tell us the model and what you are testing and we will confirm the right one before you order.
