Fiberlock RECON ULTRA Smoke Odor Sealer - White
RECON ULTRA Smoke Odor Sealer is a premium solvent-free smoke odor sealant and stain blocker designed to eliminate malodors on multiple surfaces and block tough staining.
Ideal for structural, finished, and decorative surfaces, RECON ULTRA Smoke Odor Sealer with OdorLock Plus provides one-coat odor control on most surfaces and continues to block odors even with seasonal changes in temperature and humidity.
Features
- Finish grade, solvent-free
- Blocks tough stains
- Moisture permeable
- Tintable
- Eliminates malodors on multiple surfaces
- Blocks pet and trauma scene odors
- Easily accepts topcoat
How to Use
SURFACE PREPARATION
Prior to applying Fiberlock’s ULTRA RECON Smoke and Odor Sealer, it is critical that the substrate be thoroughly cleaned. Smoke odor encapsulation is a final step that needs to be part of a comprehensive smoke/odor management protocol. This protocol should include the following steps: odor cleaning, odor neutralization, and odor encapsulation. Fiberlock recommends cleaning with RECON Heavy Duty Cleaner or Extreme Duty Cleaner, followed by the application of RECON Extreme Duty Odor Counteractant. After the substrate is clean, dry, and sound, apply ULTRA RECON Smoke Odor Sealer to encapsulate any residual odors that remain.
APPLICATION TOOLS
Apply ULTRA RECON Smoke Odor Sealer with a brush, roller, or airless spray equipment.
- Brush: Synthetic, nylon, or polyester bristle
- Roller: 3/8” nap synthetic fiber
- Spray Settings: Pressure: 2000-3000 P.S.I. Tips: .015 to .021 tips
PRODUCT APPLICATION
Apply ULTRA RECON Smoke Odor Sealer generously and uniformly by brush, airless spray, or roller. Apply one coat of ULTRA RECON Smoke Odor Sealer and ensure that the finished surface is properly sealed. Two coats may be required on some porous or heavily stained surfaces. Topcoat floor applications when foot traffic or heavy storage is expected. ULTRA RECON Smoke Odor Sealer is tintable up to 2 oz. of universal liquid colorant per gallon. Can be directly applied to wallboard, sheetrock, wood, masonry, and concrete. Ferrous metals may require a DTM primer to prevent flash rusting.
COVERAGE
- Smooth Surfaces: 200-400 ft2/gal.
- Porous Surfaces: 100-200 ft2/gal.
DRYING TIME
- @ 70°F 50% R.H.
- To Touch: 30 Min.
- Recoat: 2 Hours
- Topcoat: 2 Hours
CLEANUP
Clean tools and drippings with warm soapy water before ULTRA RECON Smoke Odor Sealer dries. Dispose of waste according to all existing local, state, and federal regulations. PRECAUTIONS Store in a dry place at temperatures between 40°F (4.5°C) and 90°F. (32°C). Stir thoroughly. Do not mix with any other coatings, additives, solvents, or colors in oil. Do not apply when air or surface temperature is below 45°F, or when drying conditions are poor, or when surfaces are above a 15% moisture level content. In areas with high humidity, apply when the surface temperature is 45°F or higher. Use adequate ventilation during application. When applying with a sprayer, wear a NIOSH-approved respirator with any R, P, N, or HE filter.
