Turbo Force Mini Handheld Spinner Hard Surface Tool (MTH-43)
The Turbo Force Mini Handheld Spinner Hard Surface Tool (MTH-43) uses high-impact jets to concentrate the cleaning power of your portable or truck mount, giving you the power of up to 2,500psi and 230°F at your fingertips.
You can clean a large counter in no time, or power through soot, grime, and even graffiti.
- Up to 2500 PSI
- ST-NYLON High Strength Body Construction
- Ideal for Countertops, Showers, and Much More
The patented automatic vacuum compensator leaves surfaces drier and prevents "sticking" and excess water buildup. Your customers will love the results: cleaner surfaces that are dry in no time.
It is so lightweight and easy to use that you can operate it with just one hand.
The Mini Turbo is built to withstand daily use and abuse. It features high-strength injection mould nylon construction that resists dents, chips, and cracks.
Includes a one-year manufacturer's warranty.
Where the Mini fits in a hard-surface kit
A floor spinner such as the 12 inch Turbo Hybrid (TH-40) cleans the open floor. The Mini does the surfaces a floor tool cannot — benchtops, vanity tops, shower walls, splashbacks, steps and stair treads. For corners, coves and grout lines against a wall, the Cobra C-150 detail tool reaches further into the edge.
Specifications
| Model | MTH-43 |
|---|---|
| Pressure | Up to 2500 psi |
| Temperature | Up to 230 °F (about 110 °C) |
| Body | ST-NYLON injection-moulded nylon |
| Recovery | Patented automatic vacuum compensator |
| Replacement brush ring | MTH-44 Mini brush ring |
| Warranty | One year, manufacturer |
One US distributor lists the Mini at up to 2150 psi and 200 °F. Turbo Force's own site and our supplier give 2500 psi. If your machine runs above 2150 psi, ask us before relying on the higher figure.
Operating advice
- Keep the head flat on the surface while spraying. Lifting it off the surface releases spray and breaks recovery.
- Work at the pressure the surface needs, not the maximum the machine can deliver. Soft stone, sealed surfaces and silicone joints do not need 2500 psi.
- Protect adjoining surfaces, fittings and electrical outlets before cleaning vertical faces.
- Replace the brush ring when it shortens. A worn ring is the usual cause of a tool that leaves water behind.
Frequently Asked Questions
Does it work with a portable?
Yes. It is designed for portables and truckmounts. The cleaning result depends on the pressure, heat and vacuum your machine delivers.
Can I use it on walls?
Yes — shower walls and splashbacks are typical uses. The vacuum compensator helps hold the head to the surface.
What wears out?
The brush ring is the main wear part. Order the Mini brush ring — floor-tool rings do not fit.
Documents
TurboForce parts are model-specific — the TH-40, TH-15 and the Mini share very little. Tell us your tool model and we will confirm the part before you order.
