Tramex RHIE2B – Hygro-i2 Electronic Interface Cable (Bayonet)
RHIE2B has a bayonet connector and is for use with the CMEX5, MEX5 and DL-RHTX. It will not connect to a CMEX2 or MRH3.
The Hygro-i2® electronic interface cable is what connects a Hygro-i2 relative humidity probe to the meter. The probe provides measurements of humidity, temperature and dew point in structural materials such as concrete flooring and walls, as well as ambient conditions within the building envelope.
Check your meter's connector before ordering
| RHIE2 – DIN connector | CMEX2, MRH3 |
| RHIE2B – bayonet connector | CMEX5, MEX5, DL-RHTX |
This is the bayonet version. If your meter is a CMEX2 or MRH3, order the RHIE2 instead. The two are not interchangeable.
How many do I need?
One. The cable is not consumed by testing and is not probe-specific – a single cable serves however many Hygro-i2 probes you own. Buy one per meter, not one per probe.
Documents
Frequently asked questions
Do I need this cable if I already have probes?
Yes, unless you already have the cable for that meter. The probe has no direct connection to the meter without it.
Is the cable included with the probes?
No. Probes are supplied without the interface cable, which is why it is easy to order probes and find you cannot read them. The ASTM F2170 accessory pack includes the cable along with probes, liners, salt and the tool box.
Can I adapt a DIN cable to a bayonet meter?
No. The connectors are physically different and there is no adaptor. Order the version that matches the meter.
If you are unsure which connector your meter uses, contact Carpet Cleaners Warehouse with the model number before ordering.
