Sonitron King Hit is a highly soluble powdered carpet prespray, supplied in a 10 kg pail. Sonitron says it offers the concentration and economy typical of powders, and that it is very effective on insoluble, finely dispersed soils such as red soil ground into traffic areas.
Sonitron states it suits all carpet fibres, including 5th generation nylon.
What It Is For
- Prespraying heavily soiled traffic lanes before extraction
- Fine, insoluble soils that liquid presprays struggle with, such as red soil
- Operators who want the lower cost per litre of a powder
Why a Powder?
A powder carries no water, so you pay to freight and store active ingredient only, and mix it as you need it. The safety data sheet shows King Hit contains sodium percarbonate, which releases oxygen when dissolved in water. Mix only what you will use on the job: an oxygen-releasing solution loses strength once made up and should not be stored in a sealed sprayer.
Directions for Use
Sonitron does not publish dilution rates for King Hit on its website. Follow the directions on the pail, and ask us for them if you need them before you order. Dissolve the powder fully before it goes into the sprayer, apply evenly, agitate, allow dwell time without letting it dry, then extract.
Pre-test for colourfastness. Keep the lid on the pail and store it dry.
Safety
About the safety data sheet: the sheet CCW holds for this product (SDS 5031) is revision 1, dated 25 July 2016. It is more than five years old and a current revision has not been obtained. Use the information below as a guide and read the label on the pail.
The sheet classifies King Hit as hazardous. Signal word: Danger.
- Causes skin irritation.
- Causes serious eye damage.
Wear tight-fitting chemical splash goggles or a face shield and protective gloves, and avoid raising or breathing dust when you scoop and mix. If it gets in the eyes, rinse with water immediately and get medical attention.
Specifications
| Brand | Sonitron |
|---|---|
| SKU | SON1180-10C |
| Pack | 10 kg pail |
| Type | Powdered carpet pre-spray (SDS) |
| Declared ingredients | Sodium percarbonate 10–30%; disodium metasilicate 1–10% (SDS) |
| Appearance | White, medium-density powder, spice odour (SDS) |
| pH | 9.8, diluted solution (SDS) |
| Solubility | 200 g per litre of water at 25°C (SDS) |
| Transport | Not dangerous goods (SDS) |
| SDS held | SDS 5031, revision 1, 25 July 2016 |
| Dilution | Not published on Sonitron's website — see the pail label |
Frequently Asked Questions
Is it suitable for nylon with stain protection?
Sonitron states it suits all carpet fibres, including 5th generation nylon.
Can I mix a batch and keep it for tomorrow?
Mix what you need for the job. A percarbonate solution releases oxygen and loses strength once made up, and should not be left in a sealed sprayer.
What dilution do I use?
Sonitron does not publish a rate on its website. Use the rate on the pail.
Documents
Related Products
Not sure which prespray suits the carpet? Tell us the fibre and the soil and we will help you choose before you order.
