Sampson Polypro Winner Plus is a strongly alkaline carpet cleaner for heavily soiled carpet. It is used as a prespray, as an extraction detergent in the machine, and at a stronger dilution for spot removal. Sampson's safety data sheet lists it as a carpet shampoo, pre-spray and spot cleaner.
Not suitable for wool carpets. The concentrate is above pH 12 (SDS).
What It Is For
- Heavily soiled synthetic carpet, including traffic lanes
- Prespraying ahead of extraction
- In-tank extraction detergent
- Spot removal at a stronger dilution
The supplier's product information describes it as a very powerful, lemon-scented cleaner with cleaning agents for stubborn dirt and stains and built-in deodorants.
Dilution
Rates from the supplier's product information, as published by Sampson distributors:
| Spot removal | 1:10 |
|---|---|
| Prespray | 1:40 to 1:50 |
| Extraction detergent | 1:100 to 1:200 |
A 20 L drum makes roughly 820 to 1,020 L of prespray, or 2,020 to 4,020 L of extraction solution. Check the rates against the container label before use.
Directions for Use
- Use clean hot water at 50 to 70°C. Warm to hot water improves cleaning.
- Pre-test on an inconspicuous area for colour loss and browning before you start. This matters most when spotting, because the solution is stronger.
- A 1:40 solution is pH 11. Follow a high-pH prespray with an acid rinse to bring the fibre back towards neutral and reduce the risk of browning.
- Do not use it on wool.
Safety
Sampson's safety data sheet (Winner Plus, revision 4, 18 July 2024) carries the signal word Warning.
- Causes skin irritation.
- Causes serious eye irritation.
- May cause an allergic skin reaction.
- Harmful to aquatic life with long lasting effects.
Wear tight-fitting chemical splash goggles or a face shield and protective gloves when handling the concentrate, and avoid breathing the spray. If it gets in the eyes, rinse cautiously with water for several minutes. Wash contaminated clothing before reuse. Read the full SDS before use.
Specifications
| Brand | Sampson Chemical Products |
|---|---|
| SKU | CSCPWINPLUS020 |
| Pack | 20 L |
| Type | Carpet shampoo, pre-spray and spot cleaner (SDS) |
| Declared ingredients | 2-butoxyethanol; 4-nonylphenol branched, ethoxylated; sodium metasilicate pentahydrate; sodium dodecylbenzenesulfonate; d-limonene; sodium xylenesulphonate — each 1–10% (SDS) |
| Appearance | Green liquid, citrus odour (SDS) |
| pH | Above 12, concentrate (SDS); 11 at 1:40 (supplier product information) |
| Specific gravity | 1.01 (SDS) |
| Hazard classification | Skin irritation category 2; eye irritation category 2A; skin sensitiser category 1; H412 (SDS) |
| Transport | Not dangerous goods (SDS) |
Frequently Asked Questions
Can I use it on wool?
No. It is not suitable for wool carpets. The concentrate is above pH 12 and still pH 11 at prespray strength.
Is it a prespray or an in-tank detergent?
Both. Use 1:40 to 1:50 as a prespray, or 1:100 to 1:200 in the machine as an extraction detergent.
Do I need an acid rinse after it?
It is good practice after any high-pH prespray. An acid rinse neutralises alkaline residue, which otherwise attracts soil and can contribute to browning.
Do I need gloves?
Yes. The SDS classifies it as a skin irritant and skin sensitiser.
Documents
Related Products
Not sure which prespray suits the carpet? Tell us the fibre and the soil and we will help you choose before you order.
