Product Overview
Mytee H441 straight T-bar, 10 inch, arms set at 42 degrees. It is the spray bar for the Mytee 12 inch Spinner hard surface tool.
Compatibility
- Mytee 8904 Spinner (current parts list)
- Mytee 8903 Spinner
- Mytee A117 low-profile Spinner head replacement kit, which includes one H441
The 10 inch bar sits inside the 12 inch head. Do not order it by head diameter alone.
Match the Bar to the Head
Spinner bars are sized to the head. Fitting a bar from a different size head changes where the jets land relative to the shroud, and solution that lands outside the seal is solution the vacuum will not recover.
The smaller bar is the Mytee 4 Inch Spray Bar T-Bar.
Parts That Fit With It
On the 8904 the bar carries two Mytee H505A 1/8 inch stainless jets (VV1502). When a spinner starts cleaning in bands, check the jets are all flowing and the bar is straight before changing pressure or chemistry.
Specifications
| CCW SKU | MPH441 |
| Mytee part | H441 |
| Type | Straight T-bar |
| Length | 10 inch |
| Arm angle | 42 degrees |
| Tool | Mytee 12 inch Spinner (8903, 8904) |
| Jets | Mytee H505A, 1/8 inch VV1502 (not included) |
Frequently Asked Questions
Why is a 10 inch bar used on a 12 inch Spinner?
The bar has to rotate inside the head and shroud. Mytee specifies the 10 inch H441 for the 12 inch head.
Does it come with jets?
No jets are listed with the H441. The 8904 uses two H505A 1/8 inch jets.
Does it fit the older style Spinner head?
Mytee lists the H441 in the A117 kit used to convert 8903 and 8904 Spinners to the low-profile head. If you have the old head, send us a photo.
What causes banding on a spinner?
Usually a blocked jet or a bent bar. Both are cheaper to check than chemistry.
What We See in the Field
[Technician's Note — replace before publishing: two to four sentences of first-hand CCW field experience relevant to this product. A pattern you see, a mistake customers make, or something learned from servicing or selling it. Not spec repetition, not a sales pitch, not invented.]
Mytee part numbers change between machine generations. Tell us your model and serial number and we will confirm the part before you order.
