The MV910 plastic-bodied trigger spray gun. It is rated 1,850 PSI and 5 GPM at up to 80 °C, with a 1/4 inch male inlet and 1/4 inch female outlet.
Where it is used
- Older Hydro-Force AS08 and AS08R injection sprayers
- Hydro-Force AS18 and AS23 solvent sprayers
- As the original priming valve on some Mytee and Ninja machines
Important: this gun is superseded
The MV910 has been superseded by the factory. CCW holds remaining stock for operators who want a like-for-like replacement. If you are not tied to the plastic gun, the current Spray Gun MV960 (NA030) is rated higher at 2,600 PSI and 7 GPM with the same 1/4 inch ports.
Tell us the machine before you order and we will confirm which gun suits it.
Specifications
| CCW SKU | NA0820A |
|---|---|
| Type | Plastic trigger spray gun, MV910 |
| Maximum pressure | 1,850 PSI |
| Maximum flow | 5 GPM |
| Maximum temperature | 80 °C |
| Ports | 1/4 inch male in, 1/4 inch female out |
| Replacement valve | NA0845 |
| Other references in CCW records | ML320 |
| Status | Superseded by the manufacturer |
Gun or valve?
A gun that will not shut off cleanly, or weeps past the trigger under pressure, usually has a valve problem. The internal valve is available separately as the Replacement Valve for MV910 (NA0845). A leak at the inlet or outlet fitting is a thread or O-ring issue and needs neither.
Replace the whole gun when the body is cracked, the trigger pivot is worn, or the threads are damaged.
Frequently asked questions
Should I buy this or the MV960?
For a like-for-like swap on an older sprayer, this one. For anything running near 1,850 PSI, or where you want a gun that will stay supported, the MV960.
Can I use it on a truckmount for tile work?
Not above its rating. Check your machine's pressure and solution temperature against 1,850 PSI and 80 °C first.
Who makes it?
Suppliers attribute the MV-series guns differently and we have not settled it from a primary source, so we do not state a manufacturer on this page.
Leaking or sticking gun? Tell us the machine and the symptom and we will work out whether it needs a valve or a gun.
