Bridgepoint Flex Traffic Lane Cleaner 3.78ltr

Regular price $73.26 Sale price $46.12

SKU:CC22GL

Flex Traffic Lane Cleaner is what you need when it's time to bring in the heavy artillery. Flex is the strongest pre-spray in the Bridgepoint line.

Flex dissolves soils and oils so quickly, that on some carpets, you can actually see it working.

  • “Nuke it” clean with high-powered carpet pre-spray for severely soiled carpets
  • As soon as you apply it, you can start to see it dissolve soil right before your eyes
  • Ideal pre-spray for apartments, synthetic commercial carpets, and bringing dead carpets back to life
  • A special blend of surfactants, alkaline builders, and boosters

Dilution Ratios: 8:1 (125ml/ltr) RTU pH: 12.5 Contains: 3.78ltr

pH and fibre compatibility

Bridgepoint publish a pH figure for most products in this range, and it is the single most useful number when deciding what to put on a floor.

pH Typical use Fibre caution
2.8 to 5.5 Fibre set, encapsulating guards, acid rinses, protectors Suits wool and natural fibre. Strongly acidic products can affect some dyes — test first.
6.5 to 8 Shampoos, fabric prespray, general cleaning Broadly fibre safe including wool.
9 to 10 Encapsulants, powders, general prespray Usually fine on synthetic. Check the label before use on wool.
11 and above Traffic lane cleaners, fire restoration, heavy degreasing Synthetic only unless the label says otherwise. High alkalinity damages wool and can cause browning on natural fibre.

Rinse to a neutral or slightly acidic finish. Alkaline residue left in the pile attracts soil and can cause the carpet to resoil faster than before it was cleaned. That is what an acid rinse is for, and why the pH of the rinse matters as much as the pH of the prespray.

Frequently asked questions

Can I use this on wool?

Check the pH against the table above and read the label. Products at pH 11 and above are for synthetic fibre unless Bridgepoint state otherwise. Wool tolerates a much narrower pH band than nylon, and alkaline damage is not reversible.

Why does my carpet resoil quickly after cleaning?

Usually alkaline residue left in the pile. High pH cleaners work by breaking down soil, but anything left behind stays sticky. Rinsing to a neutral or slightly acidic finish is what prevents it.

Do I need to dilute exactly?

Yes. The dilution on the label is what the published pH refers to. Running a product stronger than specified moves the pH further from neutral, which increases both cleaning power and the risk to the fibre.

Is the documentation Australian?

The safety data sheet is an Australian edition issued by Aberford Holdings (the importer, trading as Carpet Cleaners Warehouse), prepared from the manufacturer's US edition. The label and specification sheet are the manufacturer's North American editions, provided for technical reference.

Safety

The Australian safety data sheet issued by Aberford Holdings (importer, trading as Carpet Cleaners Warehouse) classifies the product as a hazardous chemical and dangerous goods: signal word Danger; causes severe skin burns and eye damage. Transport: UN 3266, Class 8, Packing Group II. Wear chemical-resistant gloves, goggles and a face shield when handling it, and add the product to water when diluting, never the reverse. Read the safety data sheet before first use. For poisons advice, call 13 11 26.

Dangerous goods limited quantity mark DG Shipping Surcharge Applies

Documents

The Australian sheet is prepared by Aberford Holdings from the manufacturer's US edition and reflects Aberford's own classification under the Australian WHS Regulations and the ADG Code. It is reviewed at least every five years, or sooner if the manufacturer revises the source sheet. Labels, specification sheets and cleaning guides are the manufacturer's North American editions and are provided for technical reference.