Replacement handle grip for Cimex CR38 and CR48 floor machines, part number 02-4175-0000. Sold each.
Why replace a grip
A Cimex is steered and controlled entirely through the handle. A split, loose or missing grip lets the hand slide on the bar, which makes the machine harder to control on start-up and tiring to run for a full shift. It is a small part that decides how the machine feels to use.
Fitment
- Cimex CR38
- Cimex CR48
If your machine is an older Cimex or a different model, send us the model and serial number and we will confirm the grip before you order.
Specifications
| Part number | 02-4175-0000 |
|---|---|
| Fits | Cimex CR38 and CR48 |
| Pack | Each — order two for a pair |
| Dimensions and material | Not published — ask us to measure stock if you need them |
| CCW SKU | CCT-P02-4175-0000 |
Fitting
- Unplug the machine before working on the handle.
- Clean the bar back to bare, dry metal before fitting the new grip.
- Check the handle switch and cable while you are there; a worn grip often goes with a tired handle.
Frequently asked questions
Is it one grip or a pair?
One. Order two if you are replacing both sides.
Do you carry other Cimex parts?
See Cimex Accessories, or send us the part number you need.
Send us your machine model and serial number and we will confirm the part before you order.
