Teflon Wand Glide for AW29 12" Carpet Cleaning Wand

One of the most cost-effective upgrades you can make to a carpet cleaning wand is replacing a worn wand glide. A quality PTFE (Teflon) glide dramatically reduces friction between the wand and the carpet, making the wand easier to manoeuvre while helping maintain vacuum efficiency, improving operator comfort and protecting expensive stainless steel wand lips from premature wear.

This premium 12-inch replacement glide is designed for AW29-pattern carpet extraction wands used with both truckmount and portable carpet cleaning machines. Manufactured from durable, low-friction PTFE, it delivers smooth gliding performance while helping extend the service life of your wand.

Why Replace Your Wand Glide?

Every wand glide is a consumable wear item. As it wears, friction increases, the wand becomes harder to push and pull, and the stainless steel wand lips become exposed to damage. Many operators become accustomed to this gradual deterioration without realising how much easier their wand should perform.

Replacing a worn glide restores smooth operation, reduces fatigue and helps keep your wand performing as intended.

Reduces drag across carpet.
Makes the wand noticeably easier to push and pull.
Reduces operator fatigue.
Protects expensive stainless steel wand lips.
Helps maintain a consistent vacuum seal for efficient water recovery.
Protects carpet fibres and delicate hard floors from unnecessary wear.
An inexpensive replacement that can significantly improve everyday cleaning performance.

Compatibility

This glide is designed for AW29-pattern 12-inch carpet cleaning wands with a standard wand lip width of approximately 14.47mm.

Compatible with many professional carpet cleaning wands, including:

CCW CMP 1.5" × 12" 2 Jet S-Bend Wand
Cleanstar CWCE-1JET
Cleanstar CWCE-2JET
Westpak Classic 12"
Many other AW29-pattern professional carpet cleaning wands.

Because wand dimensions vary between manufacturers, production runs and years of manufacture, we recommend measuring your existing glide or wand lip before ordering if you are unsure.

Need the larger size? If your wand lip measures approximately 17.97mm, use the AW29 Slotted Glide for 17.97mm Wand Lips.

Performance Benefits

Premium PTFE (Teflon) construction.
Extremely low coefficient of friction.
Smoother wand movement.
Reduced operator fatigue.
Excellent wear resistance.
Improved protection for wand lips.
Suitable for truckmount and portable extraction equipment.
Designed for demanding commercial use.

Installation Guide

For easiest installation, immerse the glide in hot (not boiling) water for approximately 2–3 minutes. Warming the PTFE makes it slightly more flexible, allowing it to stretch over the wand lips more easily.

After installation:

Ensure the glide is fully seated.
Check it sits evenly across the wand.
Confirm it cannot move during operation.
Inspect the spray pattern.
Confirm the vacuum slot is unobstructed.

Remove the glide only when necessary for cleaning or replacement, as repeated removal can gradually reduce retention.

Professional Installation Advice

There is no universal industry standard for carpet cleaning wand lip dimensions. Even wands that appear identical may vary slightly depending on the manufacturer, production run or previous wear. For this reason, replacement glides are rarely an identical fit on every wand.

Minor fitting adjustments are sometimes required to achieve the best fit and long-term retention. Depending on the individual wand, this may include carefully removing burrs, easing tight areas, fitting retaining set screws, notching the wand lips or carrying out other minor modifications. The most appropriate installation method depends on the condition of the individual wand and should only be undertaken by a competent person using suitable tools.

Before placing the wand into service, always ensure the glide is securely retained, correctly aligned and does not adversely affect spray pattern, airflow or vacuum recovery.

Maintenance

Inspect the glide regularly.
Clean lint and debris from beneath the glide.
Inspect spray jets whenever the glide is removed.
Replace the glide before the stainless steel wand lips contact the carpet.
Check retention periodically.

Signs It's Time to Replace Your Glide

The wand feels noticeably harder to move.
The glide becomes loose.
Cracks or chips appear.
The glide has worn thin.
The stainless steel wand lips begin contacting the carpet.
Vacuum recovery becomes less consistent.

Technical Specifications

Product	Replacement Wand Glide
Pattern	AW29
Length	12" (305mm)
Material	PTFE (Teflon)
Lip Width	Approximately 14.47mm
Application	Professional carpet cleaning extraction wands
Equipment	Truckmount & Portable Extractors

Frequently Asked Questions

Will this fit my wand?
It is designed for AW29-pattern 12-inch wands with approximately 14.47mm lip width. If you're unsure, measure your existing glide or contact us before ordering.

Can a worn glide affect cleaning performance?
Yes. As the glide wears, friction increases and the vacuum seal can deteriorate, making the wand harder to use and reducing water recovery.

Can I install it myself?
Yes. Most experienced technicians can fit a replacement glide themselves. Depending on the individual wand, minor fitting adjustments may be required.

How long will it last?
Service life depends on usage, carpet types, operating technique and the condition of the wand. Regular inspection is recommended.

What is PTFE?
PTFE (commonly known as Teflon) is a high-performance engineering polymer renowned for its extremely low friction, excellent wear resistance and long service life.

Why Buy from Carpet Cleaners Warehouse?

Australia's trusted supplier to professional carpet cleaners and restoration contractors.
Expert technical advice from people who use the equipment.
Fast dispatch from Australian stock.
Quality replacement parts for professional carpet cleaning equipment.

Need help selecting the correct glide? Contact the Carpet Cleaners Warehouse team before ordering. We'll help you identify the correct glide for your wand and answer any installation questions.