Product Overview
Pumptec 112T plunger pump head, pump only, as used on the Force 250. Rated to 200 psi and 1.61 US gpm (about 6 L/min).
Specifications from Pumptec
- Maximum pressure: 200 psi
- Open flow: 1.61 US gpm (about 6.1 L/min)
- Seals: Teflon; O-rings: Buna
- Inlet and discharge ports: two each, 1/4 inch female NPT
- Maximum fluid temperature: 60°C (140°F)
- Body: anodised aluminium; plunger: 304 stainless steel; valves: stainless steel/acetal
Pump Only
This is the pump head without a motor. Match it to the motor and mounting on your machine.
Rebuild Rather Than Replace
A plunger pump is a machined body with consumable seals, valves and O-rings inside it. Those consumables are what fail; the body outlives them many times over. A pump that has lost pressure or started pulsing is almost always telling you the valves or the seals are done, not that the pump is finished.
A rebuild kit and an hour on the bench is a fraction of the price of a pump, and it keeps the machine earning.
Service Parts
- Pumptec Kit A Plunger and Seals, 112T and 114T, Buna (10001)
- Pumptec Kit B Valves and Seals, 112, 113, 217, 350, 356/360 (10004)
Service Intervals
Pumptec recommends checking seals and valves at 500 hours, then every 500 hours until wear shows. Valves typically need changing at every seal change, and the pressure regulator should be serviced at the same time.
Service Manual
Specifications
| CCW SKU | PT001 |
| Pump | Pumptec 112T (Force 250), pump only |
| Max pressure | 200 psi |
| Open flow | 1.61 US gpm (about 6.1 L/min) |
| Seals / O-rings | Teflon / Buna |
| Ports | 2 inlet, 2 discharge, 1/4 inch F NPT |
| Max fluid temperature | 60°C (140°F) |
| Body / plunger | Anodised aluminium / 304 stainless steel |
Frequently Asked Questions
Does it include a motor?
No. Pump head only.
Can I feed it hot water?
Pumptec rates it to 60°C (140°F) at the pump. Heaters belong after the pump.
Which rebuild kits fit?
Kit A 10001 and Kit B 10004.
What We See in the Field
[Technician's Note — replace before publishing: two to four sentences of first-hand CCW field experience relevant to this product. A pattern you see, a mistake customers make, or something learned from servicing or selling it. Not spec repetition, not a sales pitch, not invented.]
Pump part numbers vary by pump series and by the machine they were fitted to. Tell us the pump model, or the machine and its serial number, and we will confirm the part before you order.
