The female half of the pump-out hose coupling for Dri-Eaz dehumidifiers. Dri-Eaz lists this part as 08-00302, a quick disconnect body with a 1/4 in hose barb; its current Dri-Eaz number is 105025.
The Pump-Out Coupling Pair
A dehumidifier pump-out line needs a matched pair — a male coupler on one side and a female coupler on the other. Mixing brands or generations here is the usual reason a line weeps overnight.
That line runs unattended in an occupied property, discharging into a sink or out a window. A joint that drips produces a second water damage claim on top of the one you were called in for. Check the couplings and their seals every time the line is made up.
Where It Is Used
US Dri-Eaz parts lists and distributors show the 08-00302 female body on dehumidifiers including:
- 1200 (F203-A)
- 2000 (F232)
- 2400 (F292-A)
- F246
- LGR 3500i (F411), listed with the 08-00303 male insert
These are Dri-Eaz's US model numbers. Australian 230 V models and other generations may use a different fitting, so check your machine before ordering.
Specifications
| Brand | Dri-Eaz |
|---|---|
| Dri-Eaz part number | 08-00302 (current number 105025, per US Dri-Eaz parts distributors) |
| Type | Quick disconnect body (female) |
| Hose barb | 1/4 in |
| Mating part | Male quick disconnect insert, 08-00303 |
| CCW SKU | F0800302 |
Important: Check the Barb Size on Both Halves
Dri-Eaz lists this female body with a 1/4 in hose barb, and the matching male insert (08-00303) with a 3/8 in barb. On that pairing the two ends of the coupling can take different hose sizes. Check which half your hose connects to and measure the hose inside diameter before ordering.
Fitting and Care
- Switch off and unplug the dehumidifier and drain the pump reservoir before changing a fitting.
- Cut the hose end square and push it fully over the barb. Secure it with a small hose clamp if the hose is loose or the run is long.
- Connect and disconnect the coupling a few times to check it latches fully, then run the pump and check the joint for weeping before leaving the machine unattended.
- Replace a coupler that is cracked, will not latch, or leaks after the hose is refitted.
Frequently Asked Questions
Is this the male or female half?
Female — the body the male insert pushes into. The male half is sold separately as F0800303.
Will it fit my Dri-Eaz dehumidifier?
It appears on US Dri-Eaz parts lists for the 1200 (F203-A), 2000 (F232), 2400 (F292-A), the F246 and the LGR 3500i. For any other model, send us the model and serial number and we will confirm before you order.
Should I replace both halves together?
If the line is leaking and you cannot tell which half is worn, yes. Fitting a new half to a worn one is a common reason a line keeps weeping.
Related Products
Dri-Eaz parts vary by model and generation. Send us the machine model and serial number and we will confirm the part.
