The Tramex CCTK Concrete Coatings Installer Tech Kit is a compact kit for coating and flooring installers who need the key numbers at the time of application: non-destructive concrete moisture, ambient conditions logged over time, and slab surface temperature against dew point.
Kit contents
Per the Tramex CCTK kit data sheet (April 2025):
- Concrete Moisture Encounter – CME5
- Feedback Datalogger – DL-RHTA
- Contact temperature probe
- Extension handle (E5-HBS)
- Tramex easy-travel case
- Tramex Meters app for Android and iOS (phone not included)
What the kit does
The CME5 gives non-destructive quantitative moisture readings in concrete, using gravimetric testing as the baseline, and comparative readings to ASTM F2659. The DL-RHTA tests, monitors and time-logs ambient relative humidity, temperature and dew point. The contact temperature probe plugs into the logger and records the floor surface temperature, so you can see when the slab is too close to dew point to coat.
Over Bluetooth, the Tramex Meters app geotags results, creates and shares reports, photos and charts, and mirrors the meter screen on your phone when the meter is on the extension handle.
Specifications
CME5
| Moisture content, concrete | 0 to 6% |
| CM equivalent, anhydrite | 0 to 1.9 |
| CM equivalent, concrete | 0 to 4 |
| Depth of penetration | Approximately 20 mm |
| Size and weight | 160 x 85 x 38 mm, 344 g |
DL-RHTA datalogger
| Memory | 100,000 data point entries |
| Transmission range | Up to 50 m line of sight, Bluetooth Low Energy |
| RH sensor | 0 to 100% RH; ±1.5% RH (0 to 80%), ±2.0% RH (80 to 99%) at 25 °C; resolution 0.1%; drift under 0.25% RH per year |
| Temperature sensor | −20 °C to 70 °C, ±0.1 °C |
| Size, weight and power | 100 x 90 x 35 mm, 100 g, 1 x AA |
Contact temperature probe
| Temperature range | −30 °C to 80 °C |
| Accuracy | ±0.5 °C |
Kit
| Case size | 33.5 x 24 x 8 cm |
| Weight | 1.3 kg |
| Batteries | 3 x AA |
Note – the datalogger in this kit is the ambient model
The CCTK includes the DL-RHTA, which logs ambient relative humidity and temperature and takes the contact temperature probe. It does not take RH probes, so it cannot perform in-situ RH testing inside a slab. If in-situ logging is required, the DL-RHTX is the logger you need.
Documents
Frequently asked questions
CCTK or CCIK?
The CCTK logs conditions over time, with the analogue CME5 for slab surveys – an installer's kit. The CCIK uses the digital CMEX5 with an infrared thermometer for inspection and reporting.
Can I add Hygro-i2 probes to the DL-RHTA?
No. In-situ RH testing requires the DL-RHTX, or a CMEX5 or MEX5 with the RHIE2B cable.
Is a phone included?
No. The Tramex Meters app is a free download for iOS and Android and runs on your own device.
Not sure whether the CCTK or the CCIK suits your coatings work? Contact Carpet Cleaners Warehouse before you order.
