SpeedClean CoilJet red nozzle, 0 degree
Features: 0° Spray nozzle Quick Connect fitting Stainless Steel construction resists chemical wear Perfect replacements nozzles 0.25mm Orifice size - Suitable for pressure washers with a max pressure of 3000PSI Specifications: 1/4" Quick Connect Stainless Steel fittings Spray Angle: 0° Orifice Size: 0.25mm Max Pressure: Up to 4000PSI (276Bar) Max Temperature: 150°C (300°F) Weight: 20g
Specifications
| Spray angle | 0 degrees |
|---|---|
| Orifice | 0.25 mm |
| Material | Stainless steel |
| Fitting | Quick connect |
Important — a 0 degree nozzle will fold fins
At 0 degrees the output is a concentrated stream. It has its uses on heavy deposits and on robust condenser coils, and it will flatten aluminium fins on an evaporator if used at close range or held square for too long.
Folded fins block airflow permanently and cannot be fully recovered with a fin comb. If in doubt, start with the yellow 15 degree nozzle and only move to the red one where the deposit genuinely needs it.
Stainless for a reason
Coil chemistry is corrosive by design. A stainless orifice keeps its shape and its spray pattern where a brass one opens up, and a nozzle that has worn open sprays wide and soft exactly when you wanted it concentrated.
Tell us your CoilJet model or serial number and we will confirm the part before you order — SpeedClean has revised several components and the older and newer versions are not always interchangeable.
