Injectidry HP silencer
The Injectidry Silencer is made of ABS plastic and quiets the drying system by about 2 decibels. It actually takes some of the impeller noise out in addition to attenuating the air rush sound. The Silencer attaches to either the Main AIR IN or AIR OUT Hose on the HP60 and the HP-PLUS. Due to probable high heat output, the Silencer should be elevated from surfaces that could be damaged by heat.
Specifications
| Material | ABS plastic |
|---|---|
| Noise reduction | Approximately 2 dB, per Injectidry |
| System | Injectidry HP |
Two decibels sounds small. It is not, in an occupied house
Cavity drying runs overnight, in bedrooms and hallways, in houses where people are trying to sleep. The complaint that ends a drying plan early is almost never about moisture readings — it is about noise. A homeowner who cannot sleep turns the equipment off, and then you are drying a wall that was dry for eight hours and wet again by morning.
The silencer takes some of the impeller noise out as well as attenuating the general sound, which changes the character of it — a lower, less intrusive note rather than simply a quieter whine.
It does not replace the conversation
Tell the occupants what will run, how loud it will be and why it has to run overnight. Equipment that gets switched off is the most common cause of a drying job that takes twice as long as it should.
Injectidry parts are system-specific — HP and Direct-It use different connections. Tell us which system you run and we will confirm the part before you order.
