Product Overview
The 18 inch stainless steel lance for Hydro-Force injection sprayers. It fits between the spray gun and the tip assembly, giving reach without bending.
Why Stainless
The lance carries neat-to-diluted chemistry at pressure and spends its life being put down on wet floors and in the back of a van. Stainless is used here because a plated steel tube pits at the first chip and then stains everything it touches.
Reach and Control
Eighteen inches is the standard length supplied with the Plus sprayer. It is enough to spray a floor without stooping and to get under a toe-kick or the front of a lounge, while staying short enough to keep the fan controllable at the tip.
Specifications
| CCW SKU | NA0833 |
| Length | 18 inches (approximately 457mm) |
| Material | Stainless steel |
| Position | Between spray gun and tip assembly |
| Fits | AS08 Pro, AS08P Plus and AS08R Revolution |
| Thread sizes, tube diameter and pressure rating | Not stated by the manufacturer |
Frequently Asked Questions
Does it come with a jet or retainer cap?
No. The tip and its TeeJet Retainer Cap (NA0826) are separate items.
Can I run a longer lance?
The manufacturer publishes 18 inch for this range. Anything longer changes the balance of the gun and is not something we can confirm as supported.
Which end threads into the gun?
Contact us if you are unsure — the thread sizes are not published and we would rather confirm than have you cross-thread a stainless fitting.
Related Products
- TeeJet Retainer Cap (NA0826)
- Hose Assembly (NA0828)
- Injector Valve Complete (NA0809A)
- Hydro-Force Plus Injection Sprayer (AS08P)
What We See in the Field
The common abuse is using the lance to drag, lift or lever the sprayer, which eventually loosens the threaded ends. If the fan pattern changes direction, check the jet and fittings before simply twisting the lance harder.
Tell us which sprayer you are running and we will confirm the lance and tip combination.
